Evic supreme

[CKCalmer]

Switching between different atomizers,drippers is a bit of a pain when using RVW/RVV and I still haven't figured out if there is a way to adjust on the screen. Usually I just want to switch modes to "normal VW" when I switch out the tank. I know it's possible but most of the time I resort to the computer.

Press the button three times. The current power mode will flash on the screen. Turn the wheel to the left to change modes between VV, VW, RVV and RVW. Once it's where you want it, press the button once.

Also, haven't figured out to have more than one RVW profile - software has a lot of bugs.

I agree. The software is crap. Well, the PC software is crap. The device software seems solid. I hope they'll fix the PC software in future (soon-future, please!) updates.

That said - KFL+, 1.3 coil,cotton, 5 Pawns CL, going from an initial 1.2 seconds at 17 watts down to 11 in the 5 second range is just huge flavor, huge vapor, no burning - just awesome.

And there's the key I discovered as well. I thought at first, "This RVV/RVW thing is going to be more trouble than it's worth." Then I thought, "This software is rubbish."

Then I set my curve, saved/uploaded it, unplugged and took my first vape. OH MY GOD! There's nothing that equals it. And using my beloved portable SLB eGo-V's VW mode has been relegated to "settling".

And at least, with all the crapiness of the PC software, it only takes me a few seconds to connect, change, save and disconnect.

It's crappy software that does something very, very cool. Now for them to turn it into "not crappy software that does something very, very cool."

 

[alistairs]

Press the button three times. The current power mode will flash on the screen. Turn the wheel to the left to change modes between VV, VW, RVV and RVW. Once it's where you want it, press the button once.

You can also get there by:

Menu->Vapor Set->Switch->VW

though your method sounds quicker, and easier if like me you have trouble reading the small menu font.

I agree. The software is crap. Well, the PC software is crap. The device software seems solid. I hope they'll fix the PC software in future (soon-future, please!) updates.

The software does have a few problems, but I don't think the missing RVW2 and RVW3 are PC software issues - all three RVW modes show up with my eVic and eMode. The Supreme seems to only have one RVW mode (RVW1). There are no others listed on the device, nor in the manual or website, so I suspect that's why they're grayed out in the software, seems a curious "downgrade" from previous devices.

 

[BNEAT]

You can also get there by:

Menu->Vapor Set->Switch->VW

though your method sounds quicker, and easier if like me you have trouble reading the small menu font.

It's not too bad for this change: it's the first location that flashes when you click the fire button 3 times, and the font size is pretty big there.

 

[DejayRezme]

What I do when I vape, I do a mouth inhale then do a lung inhale, then while I'm exhaling through my nose I do a mouth inhale again.
this way I get both flavor through my mouth and nose at the same time.

I will have to learn that trick one day When I try it, what seems to happen is that steam is coming out of my ears!

 

[aaronjudd]

Press the button three times. The current power mode will flash on the screen. Turn the wheel to the left to change modes between VV, VW, RVV and RVW. Once it's where you want it, press the button once.

Sometimes it works for me, sometimes, I get lost.. and start changing all the settings on the menu as a I frantically try to get back to where I was... which is why I have started saying - oh hell, I just connect to the software (I'm at the desk 90% of the time).


Hopefully someone will take advantage of the replaceable 510/ego connector, and build one with an adjustable pin!

 

[runebinder]

I wanted to say thanks to everyone for this thread. Decided I wanted to step up from an Ego Twist and came across the evic s and did some research. This thread came up in my search and all the info in here made me decide it was worth getting. Received mine with a delta tank yesterday and loving it so far.

 

[MadHacker]

are the coils on the delta tanks rebuildable?

 

[350ZMO]

I wanted to say thanks to everyone for this thread. Decided I wanted to step up from an Ego Twist and came across the evic s and did some research. This thread came up in my search and all the info in here made me decide it was worth getting. Received mine with a delta tank yesterday and loving it so far.

Congrats! I really like the supreme it regulates well low and high and has been a tank. Now the pioneer4u Seven-30 based on the SX300 on the other hand just bit the dust and vendor has several do the same.

 

[runebinder]

are the coils on the delta tanks rebuildable?

I have no idea, never done rebuildables.

 

[Jetdrive]

are the coils on the delta tanks rebuildable?

I would say it would be extremely difficult. I haven't tried yet but there are three coils in this head.

As for my Delta, it is really nice and matches the Evic Supreme perfectly. Mine has a slight gap so I have to screw the top cap up a bit to hide the gap. Funny all the reviews say it screws down flush on he Evic Supreme.

 

[BNEAT]

BTW, after 20,000+ puffs, I had to replace my 510 thread ring. I stretched the threads so badly that a tank would barely stay on! Mine was one of the early versions that had the dreaded ....-eyed connector issue, so I always backed-off the top cap to force the tank straight, and in doing so, I really put a hurtin' on those little brass threads. After I got some replacements I modified one of them and now I can proudly say that my tanks all fit flush and straight! (I should've sent the whole thing back when I first got it)

Of course, I had to pick up a black battery tube, battery cap, and black top cap while I was ordering stuff, LOL! I'm kinda diggin' the new blacked out look with a black Fogger on top. Sweet-Vapes | Electronic Cigarettes & Hand Mixed E-Liquids had everything in stock and reasonably priced. Plus, their shipping is always fast as hell!

 

[Sthur]

If you didn't get it yet fw 1.1 and 2.1 for supreme.

Joyetech eVic starter Kits, Vapor Intelligent Cigarette

Still have v1 and was hoping for an update.

 

[aaronjudd]

Still have v1 and was hoping for an update.

@sthur - not sure I understand, I had v1 and was able to update to 2.1.. are you saying you aren't able to?

 

[Ridilen]

To update the supreme firmware I had to download the PC software again. Then it told me there was an update. Tried the 2.1 firmware and didnt like it, went back to 1.1

 

[aaronjudd]

Yeah the new firmware seems "dumbed down" and it looks like you can't edit the home screen. I think the 1.1 is better as well.

 

[Kevofar]

Yeah the new firmware seems "dumbed down" and it looks like you can't edit the home screen. I think the 1.1 is better as well.

I have the same Problem with the 2.1 upgrade. Home screen is changed also???? In SW home screen is grayed out. Can I go back to 1.1? haven't found a way to

 

[Ridilen]

Simply restart the software and connect your supreme. Go through the same process you did before. You should be able to select 1.1

 

[tyrone747]

Has anyone found a good solution for the rattling button? It's driving me nuts.

 

[BNEAT]

Mine doesn't rattle, and neither does my buddy's...actually, I've not heard of this issue yet.

 

[aaronjudd]

My button also doesn't rattle, there is just a touch of battery rattle though that's a little annoying.