Fast tech APV's

[Roncgizmo]

I recently bought an MM from FT and already I'd like to buy a APV. Price wise the VAMO's look great but in the same price range
they also have the K200, SVD and the Vamo vivi as well as the Vamo V3. Any reason I should be looking at one over the other?
They all seem to do everything I want like VV, VW, Ohm check and run on a 18650 battery. However, I also understand
they are clones and sometimes ya get what ya pay for or ya get a great bargain.. Kinda hit and miss.

So basically I'd like to know if anyone here bought one or more and liked one over the other. (or not like)

 

[Chas_L]

I purchasd a Vamo V3 from them about a month ago and it has been faultless . A few days ago I puchased a second V3 from them as I have heard the V3 are being discontinued . Seems they are going back to the V2 non threaded top and center section and doing away with the spiral groves on the ody . I like both of these feactures and my VC2 has been packed away ever since my V3 arrived.

 

[Roncgizmo]

Thanks, I think the Vamo might be the one.. From what I;m reading around here it looks like I can't go wrong with it..

Any idea if someone makes a head that would just screw on to an MM?

 

[u4ia]

The SVD from fasttech is not a clone, it genuine Innokin. Also, I got the Vamo V2 from there, I love the device. My only complaint is I did not heed the warnings and got the black chrome instead of stainless steel. The finish is wearing off very quickly, but the device itself works great.

 

[Roncgizmo]

Ok, it's done! Just bought the V3 in SS and a Protank.. Now for the waiting game..lol

 

[Bkag]

Also I definitely recommend getting an airflow adaptor for the vamo both to regulate airflow and save the threads on the unit.

 

[kendall316]

I purchasd a Vamo V3 from them about a month ago and it has been faultless . A few days ago I puchased a second V3 from them as I have heard the V3 are being discontinued . Seems they are going back to the V2 non threaded top and center section and doing away with the spiral groves on the ody . I like both of these feactures and my VC2 has been packed away ever since my V3 arrived.

I also purchased a v3 from fasttech. It works great but does have a flaw. IDK if its a VAMo problem or if fasttech getting just random units, but my voltage up button doesnt click. The left button does, but the right, all you need to do is slide a finger across it and it changes voltage up. Its a pain because i constantly am checkin my voltage before i vape because it has gone from 4 up to 6 in my pocket after just a few seconds. I just ordered an iTaste MVP from fasttech yesterday so I'm hoping I have better luck with that

 

[e-pipeman]

I also purchased a v3 from fasttech. It works great but does have a flaw. IDK if its a VAMo problem or if fasttech getting just random units, but my voltage up button doesnt click. The left button does, but the right, all you need to do is slide a finger across it and it changes voltage up. Its a pain because i constantly am checkin my voltage before i vape because it has gone from 4 up to 6 in my pocket after just a few seconds. I just ordered an iTaste MVP from fasttech yesterday so I'm hoping I have better luck with that

Does the voltage up button stick out further from the body than the voltage down? If so your pcb may be seated wrongly. If you're brave there are posts on here about tweaking it, otherwise I'd send it back if you're unhappy with it.

 

[kendall316]

Does the voltage up button stick out further from the body than the voltage down? If so your pcb may be seated wrongly. If you're brave there are posts on here about tweaking it, otherwise I'd send it back if you're unhappy with it.

yes it does stick out further. Prob wont send it back. I have had it for 3 weeks and already have a jwrap on it. I prob wont be using it as much more then a back up and ohm checker when my MVP comes in anyways

 

[e-pipeman]

yes it does stick out further. Prob wont send it back. I have had it for 3 weeks and already have a jwrap on it. I prob wont be using it as much more then a back up and ohm checker when my MVP comes in anyways

You might want to have a look at this:

Vamo first impression and disassembly how to - YouTube

or search on hear for "Vamo button". You may be able to gently turn the pcb so that the buttons align properly.

 

[kendall316]

yes it does stick out further. Prob wont send it back. I have had it for 3 weeks and already have a jwrap on it. I prob wont be using it as much more then a back up and ohm checker when my MVP comes in anyways

So no need to use my vamo as an ohm checker. My MVP I ordered came in today, and even thought i ordered the v1, and paid for the v1, They sent me a v2, so it has the ohm checker in it And OMG does the battery on this thing just go and go and go and go

 

[ajfiend]

Wait a minute, fasttech sent you a MVP 2.0 when they don't even have it listed for sale on their site yet? Jackpot!

 

[rogue_cig]

Now you have my hopes up. I just ordered an MVP from FastTech as well.