Favorite cartomizer for ave juices on a 3.7?

[Dioxyde]

Hey there, recently ordered some hype, apple teaser and bobas bounty from the alien vision website, I also ordered a few different cartomizers from nhaler to try out as well.

For cartos I have an echo-e, a colossal dual coil at 2ohms, and a pack of the XL CE2 r5's which I intend on modding for better wicking.

Any direct experience you folks have with ave juices in these cartos? Advice on filling? I've been having the best luck with the condom method with the poly fill cartos. If the xl ce2's wont work with 100%vg then I don't mind just using them for my thinner juices.

Anyways I'm stoked to receive the order I've heard great things

 

[goodtimes]

I've had great luck on both CE2's and Boge LR cartos.

 

[Optimo]

Ce2s should work perfect just got to lift up on the plug inside so it has better flow and tilt your PV upside down every now and then when the juice level gets below half way to keep the wicks soaked.

 

[dale1962]

I have used all the DCC'S the mega,regular clear,stainless,ego megas and all work great with AVE juices.I also have used the 1.6ohms and 2.0ohms ones and in IMO they work better at 4.5v-6v.Filling these by slowly dripping down sides or have used a syringe on the huge DCC'S.

 

[pmoraldo]

Love the duals at 3.7v and 5v but right now running a 3.0 boge at 5v with ave very berry blue and loving it

 

[Sedateme]

I use the new ce2 fluxomizers from gotvapes. Flip the o-rings around a bit, and let the vaping excellence commence!

 

[Dioxyde]

Thanks for the advice guys. Just received the order in the mail today and I have to say these flavors are excellent I'm really enjoying the Hype right now it's got a great kick to it and it leaves a hint of jolly rancher behind. Waiting on the cartomizers to arrive but I look forward to testing them out with these juices and seeing what works best. Unfortunately I received a tip that the 2.4-2.6 CE2's would work better on a 3.7 than the XL's I had ordered which were 3.0-3.2 ohms, so I changed my order to the regular size as they were all out of anything below 3.0 on the XLs.

@Sedateme: I thought I'd heard somewhere the smaller ce2's did not require the o-ring mod, is that correct?

 

[Sedateme]

I don't have the smaller ones, so I cannot comment. If memory serves, they don't even have the middle o-ring that is in-between the cup seal and the mouthpiece plug.

 

[goodtimes]

@Sedateme: I thought I'd heard somewhere the smaller ce2's did not require the o-ring mod, is that correct?

I do prefer to do the O-ring mod on the smaller CE2's, but they don't actually have the middle O-ring. What I do is trim off the lip around the outside of the cup seal then put it back over the cup (flat side down). This works reasonably well although I have been getting a little leakage when laid on their side for a while. The middle O-rings on the larger CE2's are literally perfect. They don't leak and they don't restrict wicking at all.

 

[Dioxyde]

I do prefer to do the O-ring mod on the smaller CE2's, but they don't actually have the middle O-ring. What I do is trim off the lip around the outside of the cup seal then put it back over the cup (flat side down). This works reasonably well although I have been getting a little leakage when laid on their side for a while. The middle O-rings on the larger CE2's are literally perfect. They don't leak and they don't restrict wicking at all.

Okay I'll give that a shot goodtimes, looks like the smaller ce2's wont be good for taking out. Guess I'll have to wait until gotvapes has the 2.6-2.8's back in stock.

I will report back on the performance of these juices in the cartomizers I listed, I'm really curious about how the flavor will come through on the echo-e, I have heard some conflicting opinions.