Favorite Drip Tips?

[wesson]

Acrylic & wood from Molehill Mountain Arts

Just went to their website. There's nothing for sale??? Unless I dumb thumbed something. I too am looking for better 501 drip tips; I hate the feel of metal tips against my lips and teeth (and I don't like the cold feeling), so I'm thinking wood, acrylic or delrin. My problem is that a lot of the aftermarket tips don't fit well; they're are often reported as "too loose" and I don't want to fool around with dental floss or tape wraps to make something work properly.

Peter

 

[Tngo]

Try out ninja mods super carb AFC delrin drip tip, a bit pricey($20) for one but i think its absolutely worth super comfortable on your lips nice O-rings for a snug fit, and you can adjust the airflow too! Cherry vape cloud chasers drip tip is another one of my go to but they look a little funny sometimes as it doesnt fit all the way down on some devices.

 

[wesson]

Drip tip designz has some awesome tips. Not cheap though. My favorite is my carbon fiber black one. Goes nicely with my reo =)

Just read your post. Wow, what a great selection at Drip Tip Designz. As you mention, pricey, but I'm pretty particular about what I put in my mouth, so...
Lol. Thank you.

Peter

 

[GrandMoff]

I went through a phase where every RDA I bought had to have a chuff cap so I could obnoxiously blow clouds into crowded spaces, and they're nice and all but I'll basically take any tip nowadays. I love the look of white derelin tips and beyondvape has some cool ones. I have a bunch of metal base tips with the derelin inserts.

 

[WillyZee]

I'm fine with the one's that come with the Kayfun LiteV2

 

[SacredNut]

This may be a stupid question, but are all 510 drip tips interchangeable? I'm pretty sure my nautilus, aerotank, protanks all are 510 but some don't fit as snug as others. Some can pop out with slight lip pressure, while others take a solid tug action? I've never used any other drip tips than the stock ones that come with each tank. If they are all interchangeable, I want to get a dozen different ones like yesterday!

 

[Zazoie]

Just bought these they are not here yet but in the mail and they will probably not work well but I likes them

Panda

Zombie

 

[Rorrryyy]

I wish that some of the makers of these drippers would sell only the drip tips...

The infinite CLT V1 stock drip tip is a super short heat finned little tip. I love it! It sits on my lemo drop and makes for an even shorter setup. I'd buy a bunch if I could!

 

[arth1]

My main problem is that most tips are too big. I don't want to open my mouth like a big mouth bass to vape. I wish there were tips shaped like a pipe stem. No, not the round ones that have been flattened at the top and bottom, but actually wide and flat.

 

[K_Tech]

In no particular order, glass, ceramic, and Tru-Stone, although I own several in different materials.

This may be a stupid question, but are all 510 drip tips interchangeable? I'm pretty sure my nautilus, aerotank, protanks all are 510 but some don't fit as snug as others. Some can pop out with slight lip pressure, while others take a solid tug action? I've never used any other drip tips than the stock ones that come with each tank. If they are all interchangeable, I want to get a dozen different ones like yesterday!

They theoretically should be, but a lot of manufacturers stay close to the "standard" size, although not precisely, depending on their allowed tolerances. I have some tips that will fall out if you look at them funny, and some that won't even go in. And it depends on the atomizer as well.

I did buy a few different drip tip o-rings from a couple places, although I can't recall where. If the drip tip is too loose, I'll grab a fatter o-ring, if too tight, a thinner one.

 

[Mattj317]

Different tips for different folks. And different atties.
I have a bunch from FastTech - some are EXCELLENT and some are crap - but for $3 and $4 a pop, I think it's a good overall value!

I tend to like them short, stainless, and a little unique...

Some favorites include the one that comes on a Stingray, the Loki Labs Router tip, and the Vicious Ant Chaplin...
But I rotate several of my FastTech tips through use too..!

This is kind of an old photo - selection has changed a bit - these were chosen when my preferred topper was a carto-tank (still use 'em, just not as much).

Oh wow, man! Nice selection. I'll probably need a presentation stand like that pretty soon if I keep going at the rate I'm going.

 

[Mattj317]

Even though its totally impractical and silly its still fun to show off, but I have a glass bubbler drip tip custom made so I can get a little bubble action with my vaping. Totally wrecks any semblance of taste but the clouds are still impressive and the vape is extremely cool so I can use it for cloud competitions since theres no lung irritation even on higher wattages. Like I said silly but fun to show off and unique. Otherwise an extremely wide bore delrin mouthpiece is perfect for my high wattage mods.

Nice! Don't think I'm ready for competitions quite yet, but it is always fun to show off a bit. Lol

 

[JetMac]

I have taken a liking to cherry vapes chaser tips. Made of black delrin, they are friction tips so no o-rings, they fit nice and snug on all of my atomizers and have a full lifetime warranty. If one ever breaks you snap a picture of it, email the photo, send it in and they'll give you a brand new replacement. I vape low ohms majority of the time so no heat transfer and they are wide bore so it pulls nice vapor. I literally just placed an order 10 mins ago for a second tip. I have a "port chaser" that I'm using now and just ordered the "cloud chaser XL". I have a couple of those SS DT's that I've picked up from local vape shops around town. The only SS metal DT I'm using now is the one that comes with the atomic rda.

Atomic rda DT on my rm5, and port chaser DT on my cyclone rba.


Sent from my iPhone using Tapatalk

 

[Mattj317]

Haha! They're cute though, Zazoie!

 

[TheBigE]

Another vote for the Loki Labs Router. Very compact. I don't really have a preference. I like rounded one too that was on my Nautilus mini.

 

[Mattj317]

In no particular order, glass, ceramic, and Tru-Stone, although I own several in different materials.



They theoretically should be, but a lot of manufacturers stay close to the "standard" size, although not precisely, depending on their allowed tolerances. I have some tips that will fall out if you look at them funny, and some that won't even go in. And it depends on the atomizer as well.

I did buy a few different drip tip o-rings from a couple places, although I can't recall where. If the drip tip is too loose, I'll grab a fatter o-ring, if too tight, a thinner one.

Buying O-rings: a simple solution that, for reason, I never thought of on my own!

 

[Mattj317]

Try out ninja mods super carb AFC delrin drip tip, a bit pricey($20) for one but i think its absolutely worth super comfortable on your lips nice O-rings for a snug fit, and you can adjust the airflow too! Cherry vape cloud chasers drip tip is another one of my go to but they look a little funny sometimes as it doesnt fit all the way down on some devices.

I'm leaning toward Ninja mods for their reputation.

Has anyone tried Kontrabida drip tips? The V3 looks like it will look so sleek on my Big Dripper!
http://www.oliovapes.com/product/kontrabida-drip-tip/#!prettyPhoto

 

[Chumpster]

Cherry Vape Cloud Chasers all the way!

 

[Armchair Alchemist]

For me, it has to be glass and somewhat wide.

 

[E30M42]

Anything from modish metal works