Finally part of the family, now lemme see those builds!

[Circa Survivor]

Yay for my first REO! Got it off the classifieds and it came with an RM2. So far, I'm not getting a super flavorful vape, just seems a little muted. Using a 30g micro coil at 1.2ohms. Using rayon with small tales on the base. Anyone have info and pics of builds they're using for their RM2? Thanks!

 

[Rickajho]

Tons of pics: http://www.e-cigarette-forum.com/forum/reos-mods/413000-rm2-rba-2-0-reomizer-2-rebuild-tutorial.html

 

[DoogieTony]

Congrats on the new (to you) Reo!

It would help to see a couple of pics of your build, but the general consensus is that you want to have your coil fairly close to the airhole and level with the height of the airhole.

 

[tmel]

Move your coil as close to the outter edge of the deck as possible and ensure you use an oring to line the hole up on the coil dead center, milometers matter.

 

[Filthy-Beast]

Congrats and welcome to Reoville. I'm sure you'll get it dialed in. As they said small changes in coil placement can have big impact.

 

[Mrs C]

Welcome to the neighborhood Circa

 

[Rat2chat2]

to reoville Circa Survivor. You look happy. Who doesn't when their holding a reo? Look forward to seeing you around. Please come and visit us in the reo lounge, without a doubt someone there can help you. Have fun and enjoy. Happy squonking.

 

[Circa Survivor]

Thanks eveyone! And Thanks Rickajho! I'll dig through that thread and hopefully find some helpful hints. I just need to get a hang of squonking and wicking and all that with the Reo.

 

[redeyedancer]

Congrats Circa Survivor

 

[Circa Survivor]

Thanks Rob! Still getting used to it and experimenting with different coils and wicking material to find what works for me. I think the juice I have in there is just.... bad lol. Getting some stuff in today that I know is good xD Also I'll probably be buying more REOs if I can hide it from the significant other (she'd kill me D

 

[Bigflyrodder]

Congrats and welcome Circa! I've found it's almost impossible to get a bad build on an RM2, try just moving your coil up or down a little and see how that works. Also, only need tiny tails of wick through the coil with that atty.

Good luck and glad you're here.

 

[UKPaul]

This is a cyclone but similar build to RM2 - 24g kanthal

Plus a few RM2 builds

 

[Circa Survivor]

Ok, I think I got building down on the RM2. I followed some of SuperXDrifter (sorry I don't exactly remember your name :\ ) but I found a couple O rings and put one in the juice channel, and a thicker one on the rm2 base and lined it up so the coil is directly in front of the airflow and it's facing up (as shown in his pictures.) I've got to say it works quite well. I'm using a 28g .9ohm coil that's surprisingly NOT a micro coil and using rayon with short tails that are just touching the base and kinda glued to the posts. Workin great, I think it's just the juice I have in here has been sitting around for a month and isn't really that good. But getting some new juice in today to slap in the REO and (hopefully) achieve vape nirvana.

 

[Jet Knight]

Congrats, and enjoy the vape...time to build some coils

 

[Jet Knight]

This is a cyclone but similar build to RM2 - 24g kanthal

Plus a few RM2 builds

Nice Pics...good camera!

 

[AngiBe]

Nice Pics...good camera!

No kidding! But his pics/builds make mine look like crap! LOL

Congrats Circa!!! Enjoy!

 

[Jet Knight]

No kidding! But his pics/builds make mine look like crap! LOL

Congrats Circa!!! Enjoy!

Use the Artistic Wire Tool, got mine at Michaels and I'm sure other Arts& Crafts store has them. Really easy to make tight coils, reasonable price. Michael's has become my hardware store for building coils.

 

[UKPaul]

Nice Pics...good camera!

Thanks & I-phone5s

This helps get my coils nice and tite

 

[UKPaul]

Congrats Circa btw.

Once you find a build you are happy with you will be over the moon with your Reo.

Which won't take you long.

 

[super_X_drifter]

Congrats and welcome. You are on the right track. Experimentation and tweaking is part on the fun

I'm Russ.

After about a year of nothing but single micro coil builds above 1 ohm, I've recently moved up to dual micro coils in the .57 ohm range. I like it for the sheer amount of vapor it provides. I've also moved up from 1/16" air to the dual slots on my dual coil AFC attys wide open. After acclimating to this for about two weeks, I couldn't go back to a single 1/16 airhole. I just added a second opposing 1/16 airhole to my only remaining chalice and it still didn't do it.

There's no turning back for this kid now. I'm all in and doubled down.

Here's what I'm talking about ( you'll need a LP grand for these attys though ):