Wrote a post about the crazy loose washer that was unfitted but in position under the coil with all 4 of the crowns recently received ... My bad, I stated I solved getting the washer down in the channel with needle nosed pliers but couldn't do it with the other 3 units ... finally and TRULY solved this time ,thought I'd pass it along ... use a pan head screw with a panhead the size of the washer and threads that will slip down into the coil hole (when no coil is in there) push down and that fussy tight washer will snap into the channel ... Also ,not sure if this is old or new news but I didn't know the Crown now has a $10 rba deck and its here not a pre order ...
