RDA First ever build

[johnkong]

Just did my first ever build. Frankly, it was a pain in the neck. Is it all down hill from here? More I build the easier it gets? It took me nearly an hour and a half to build double 7 wrap coils. Let me know what ya'll think about it. .33 ohms


"http://i.imgur.com/ApoPZ7F.jpg"

 

[Vyrgg]

Looks pretty good for a first build. Just keep practicing and you'll get a lot faster. The coils look very close to the posts (or is it just me) so maybe increase the space between the two next time. Don't want any short circuiting =)

 

[johnkong]

I was trying to stay clear of the top as well, Im unsure if i got an rda thats good for noobs, its a troll clone, and thanks Vrgg

 

[Vyrgg]

The world of rda's is quite complex but there's 3 main factors in my opinion.
Number of posts.
Juice well.
Air holes +general flow of air.

Depending what you're going for flavour/vape production your build will change drastically.

I personally find a velocity to be one of the easiest to build in as it's got a really good post design and lots of space to balance your coil. Really good air flow too. I would highly recomend it. It's a little different from the design you have (the more standard design)
I'd say keep playing with that one for a little while and see if you get more comfortable with it. If you're still having issues have a look at the velocity as it might be able to remedy the problems you're having.

 

[WindyCityJoe]

Nice job, it does get easier though

 

[Mikedin]

Like everything else in life the more you do it the easier it gets I can build a atty in minutes including wrapping the coil, if I have to make more Clapton wire it takes me about 15 minutes and I make about 3 feet of wire at a time the build looks great! Keep at it and you'll get used to how everything works my first build took me an hour too now it's what I do to relax after a long day!

 

[Larry J]

+1 on the Velocity. I started with an Omega and hated it. Took me an hour to get a couple of pre-made coils in it and it was a mess but still vaped. Got my Velocity and bam, built a dual coil and had it wicked in about ten minutes. I even impressed myself and was amazed at how much easier it was on the Velocity. I highly recommend it, especially for a new builder like myself.

 

[RiderVapor]

Great job, my first rda was the mutation x v3 which had been a failure for me. My second rda is a Velocity clone and have to agree, it is a real pleasure to build on.

 

[Jugband]

You're on the right track, great job! I remember my first build took me about a half hour! Now I can crank out a dozen in that time, while watching Netflix and vapeing. I'm no master builder either, it just gets easier with time. Again, great build

 

[zoiDman]

Just did my first ever build. Frankly, it was a pain in the neck. Is it all down hill from here? More I build the easier it gets? It took me nearly an hour and a half to build double 7 wrap coils. Let me know what ya'll think about it. .33 ohms


"http://i.imgur.com/ApoPZ7F.jpg"

I think that build looks Great. And Absolutely it gets Easier.