I filled it all the way up to max on the scale and it flooded and leaked onto the battery. Blew it out and tried again about 4 times - no change. I then tightened the head tight and took out some juice so that it was about at 1.6 ml on the scale. Same deal. I then tightened the tip a bit tighter than I like and the leaking mostly stopped and it is working fine now, except it is still wetting the battery slightly. juice is 70/30 pg/vg, on a Kgo-vv at 3.8 v. Head meters around 2 ohms. I lay the pv down on it's side between drags.
I've read some threads about this and know it happens sometimes with T2's. However, in the interest of shortening the learning curve is there anything else you would recommend I try, is there anything I'm missing? I tend to vape clearos almost horizontal to keep the wicks wet which works well with the Vision Stardusts I use. Am now keeping it more vertical to see if this helps. Do you think it is leaking through the wicks into the center tube or is the issue somewhere else?
Any thoughts will be much appreciated
I've read some threads about this and know it happens sometimes with T2's. However, in the interest of shortening the learning curve is there anything else you would recommend I try, is there anything I'm missing? I tend to vape clearos almost horizontal to keep the wicks wet which works well with the Vision Stardusts I use. Am now keeping it more vertical to see if this helps. Do you think it is leaking through the wicks into the center tube or is the issue somewhere else?
Any thoughts will be much appreciated
