Fluxomizers from gotvapes?

[sethkal]

Anyone have any thoughts on these?
Im planning on buying it for the use on my ego (3.4v) 650mah battery. (Most likely 2.4-2.6ohm)

 

[ninfreak]

they are great(only if modded, check gotvapes forum for helpful tips and mods for them) but not as great as the visions or my fav the stardust.....(sold out but comming back soon). the stardust is the best thing to come out of china and made for ego type pv's, my second fav is the vision grande big for an ego but looks amazing on my provari

 

[Karla Lyle]

just got the XL fluxomizers in the 3.0 Ohm yesterday and I HATE HATE HATE them. First of all the little instuction card they send with it doesn't tell you there are tiny little holes to place the needle tip in to fill the carto and the video on there site tells you to replace the inner plug to fill it. which I might add is extremely difficult. When we tried it broke the coil which is milimeters away from the rubber piece you are trying to remove. So of course I hit the coil while trying to remove the inner plug and the thing was destroted. $2.50 down the tubes and that was before I even got a chance to try it. So opened another and realized there are tiny little holes in the rubber piece where you can stick a needle in to fill. YOU DON"T EVEN HAVE TO REMOVE THE DARN BLACK PLUG!!! I was so mad it didn't mention those on the instruction card or in his demonstration video. As far as modifying it like ninfreak said, I don't know how to do that or what it does. Just as they are though, after I finally did figure out how to get the thing filled, THEY SUCK. I put 18mg Butter Icing from KBV in a 70/30 blend in it and it had very little flavor. That is when it didn't taste burnt. You have to tip it upside down between every drag or it tastes burnt, and that's after letting it soak for a half hour. The flavor out of it tastes nothing like it does in a Boge 2.0 carto. I even decided to let it soak over night and still same thing. No flavor or it's burnt. Worst $16 I ever spent. Unfortunately they were the only item I ordered so paid full shipping for just the Fluxos. UUGGGHH! Well if someone else likes them let me know, maybe we can trade for something. ANYTHING!! LOL Also if you know how to make these work please send me a PM.

 

[ninfreak]

thats why modding them is important. otherwise they taste like garbage... the mod is simple and effective. to take the inner plug out lift the tube up a tiny bit. take a bent paperclip and pry the plug out, push tube back onto base.. put the second inner plug(the small one is flat with a groove in it) in over the cup. done...vapes like a champ. i also recommend dry buring the coil fist, there is sometimes soldering slag that gets in there.

in all seriousness i recommend the stardust. no solder, no leaks, no modding.... fill and vape. perfect every time.

 

[Nomoreash]

They are my favorite carto by far. On the newest version with the black seals I don't use the the bottom seal. I pull it out and use the top seal, goove side down. Fits right over the cup and no leaking. To fill it I pull the seal and and drip from the bottle around the inside of the tube.

 

[zoiDman]

A Fluxomizers is gotvapes name for a CE2. And in my opinion, CE2’s are the Best type of Cartomizer sold.

They can take a tad more work than other types of Cartos/Attys. But the Hit & Taste is worth it.

You might read some of the Sticky Threads in the gotvapes sub-forum to find out how to get the most out of a CE2.

-----

BTW – Chris (ECF: Badkolo) one of the owners of gotvapes has for the last 2 years worked Very Closely with the OEM of the CE2 to constantly improve them. I buy All my CE2’s, and other items, from him for this reason.

 

[BoiseMike]

I'm with Karla on these. Tried 'em. Fiddled with 'em. Never would wick properly and generally tasted burnt. I stick with the regular cartos now.

 

[sethkal]

i think the burnt taste might be depending on the battery you use, and as far as I know. You defently should mod it!

 

[bluegrasslover]

I just got my first fluxes and they were terrible until modded. They work good modded but these will definitely be my first and last fluxes.

Sent from my DROID using Tapatalk

 

[Jonner]

I'm with Karla on these. Tried 'em. Fiddled with 'em. Never would wick properly and generally tasted burnt. I stick with the regular cartos now.

+1
And I modded 2 of them just trying to get them to work, BURNT taste beyond belief, no thanks.

 

[Pelon45]

got my first pack of these this week, and only leaking i get is when my fat fingers get those seals cockeyed, fluffing, modding is beyond this newbie's experience, with that said, love them so much ordered an other pack and adaptor so I can use on my echo.
bought the 2.4-2.6,using on ego 650.

 

[scalewiz]

Lots of folks have their opinions, and whatever works for you is the best. There ain't no system out there that you don't have to fiddle with.

When it comes to atomizers, simply browse through these forums. You can't begin to discover all the ways people have tried to clean them, make them hit better or worse, raise the voltage, lower the voltage, low resistance, high resistance, on and on and on.

Then you have to feed them. Dripping with leaking bottles, cartridges with condoms and filler and refilling and replacing and carrying them, cartomizers with built in filler that burns, maybe more than one coil, and as you can see it goes on and on.

I too use the fluxomizers/clearomizers/CE2's/Visions and they are my preferred system. Sure, they require fiddling and modding, but what system doesn't? They satisfy me with their better flavor, their ability to hold a decent amount of liquid, and they can be easily cleaned (and modded). Yeah, it's different than a standard atomizer, but not rocket science; it actually is super easy to play with them. Yes, they are fragile and can be pulled apart, dumping liquid. If you see a puddle, I will bet somehow it was roughly or improperly handled. I have never had a puddle. An occasional gurgle or cleanup of condensation, but that's it. If you try or use these, treat them gently. Modify and use an ego cone if you can and it really helps.

Overvoltage is not good; too hot and they taste bad very fast. Lower the voltage to it and it recovers nicely. Thick juices can limit how often you can take a hit; if they are a problem, thin them just a little with water or alcohol. Watch the videos here on the forum about them, especially the ones at Gotvapes about modding; it's easy to do and works very nicely. Don't worry about syringes too much. Once these are modded with just the top seal, it is very easy to simply pull the seal and drip your liquid down the side when it's time for a refill; syringes not needed.

Tip: Get yourself one of those sets of dental tools at the drugstore. Grind or sand the sharp points down so that they won't penetrate the seals easily. They make great hooked tools for reaching down in and pulling seals, fluffing wicks, etc.

 

[Karla Lyle]

How do you "fluff" a wick. Do you mean where the coil is wrapped? Someone else gave me some pointers too but might try to "fluff as well. I'm just so scared I'm gonna brake another coil.