Im looking at buying the fogger v4 with the increased size and copper bottom screw and it will be my first rebuildable anything I have used. How easy is it to put the coils in and all that. Is the air flow good? Will my cloud chasing dreams be realized? I got a new Hana mod Clone and this will be the tank for it. I am looking for great clouds, flavor and ease to rebuild. Is this the one for me?
Fogger V4 owners
- Thread starter reddogkc
- Start date
- th_trl_thread_readers 0
- Status
For chasing clouds a dripper would be better. But this is a dual coil setup. Not that hard to build. Check some of these Googled builds and ask yourself if you can do this and this is what you would like to do.
https://www.google.com/?gws_rd=ssl#q=fogger+v4+build&tbm=vid
On mines it took about 3 tries before I got it right. The air ring is loose. My remedy was to screw on the air ring to the top of the air hole. I wanted full air holes showing. Lock the bottom base tank right against the air ring. It should be tight there.
https://www.google.com/?gws_rd=ssl#q=fogger+v4+build&tbm=vid
On mines it took about 3 tries before I got it right. The air ring is loose. My remedy was to screw on the air ring to the top of the air hole. I wanted full air holes showing. Lock the bottom base tank right against the air ring. It should be tight there.
i personally would not recommend the fogger v4 as your first rebuildable.
i would recommend something like the taifun gt then work your way up...
if you must chase clouds i recommend a 3 post dripper. you can start with single or higher ohm dual coils
i would recommend something like the taifun gt then work your way up...
if you must chase clouds i recommend a 3 post dripper. you can start with single or higher ohm dual coils
- Status
Similar threads
- Locked
