found out a better way to refill "stock" carts!

[Jeff989]

okay well i was messing around with my e-cig stuff as usual... well i decided to try a different way to refill the carts instead of dripping directly on the filler..... i took a staple flattened out pulled out the filler material.. i found that 7 drops is perfect for my janty dura-c... then gently put the filler back in the cartridge its the perfect amount and for some reason the vapor/liquid lasts a whole lot longer on one refill....
i havent done any mods or been able to pick anything up to do mods..(thats what college does to ya lol)

tell me what you guys think!

 

[jj2]

I do that when I change the filler out. Otherwise, I just put a few drops in, blow, add a few more, blow, add a few more.
Do it this way because I don't like dealing directly with the carts each time.

 

[The Big Chief]

I pull out the whole filler, load 8-10 drops, just below the top, then slide the filler back in, and top off. They tend to last a while that way. Sometimes you can fit up to 15 drops that way also. Or just use the ol syringe and fill from bottom up.

 

[dionymnia]

I've done something that's been really successful and effective for me, that works in the opposite:

I take a straightened paperclip (or staple, toothpick, etc - anything with a long thin tip/point) and gently pack down all of the filler into the bottom of the cartridge, then drip juice into the cartridge to fill it up to the top (it'll take anywhere from 4-9 drops, depending on how much residual juice is still in it). Then I slide the paperclip along the side of the tamped-down filler, and gently pull it back up to the top of the cartridge. As it comes up, it expands with the juice.

This is also effective when you just want to eke out remaining juice - just press down the filler with the paper clip and then gently bring it back up - it'll "recharge" the filler with remaining juice and last longer between refills.

I've been doing this for several weeks - the filler will last about a week before you should take it out, rinse it, and dry it out to regain any lost "shape" to it.