Hei guys !...Have you noticed this issue before ? ...I have 2 atties that give me this result : Sometimes they are producing much of vapor but no throat kick ..Like I am using NON Nicotine juice....Are they one step before death ? ..Also I noticed that their resistance is getting red from heat after 2-3 seconds at 3.7V ...
Full smoke but not throat kick !
- Thread starter ggero
- Start date
- th_trl_thread_readers 0
- Status
If you can see the coil glowing red you need to add more liquid ggero, i think this is what you mean anyway
try a few more drops of liquid and hopefully you should get a throat hit
If your using this with the AFS the coil should not be going red, unless your pressing the button without inhaling, maybe a lasered hole problem?
ggero, please put the hole down and please take some inhales without pushing the button so liquid will come to atty
Myself and a couple of others have noticed that this latest batch of AFS atomisers from TW have needed "breaking-in" over a longer period than normal - then they really start producing decent vapour and throat hit.
Also, what Imeo suggested about doing "dry-inhales" with button down is a good idea.
Also, what Imeo suggested about doing "dry-inhales" with button down is a good idea.
6v is all i use mine at ggero, no breaking in period at 6v, but as always be aware they won't last as long at 6v as they do at 3.7
When mine aren't performing properly, I try them at 6V. It either breaks them in nicely or kills them if they were on their way out already anyway. 
I notice a good vapor but lacking throat hit when my atty is starting to run low on juice or I use VG juice.
- Status
