I bought a galileo clone some time ago and it failed a couple days after and it didnt make a connection except with ce4's... Today i found the solution
The little plastic insulator that holds the 510 connection pin must be trimmed down in size
Screw it out and pop out the screw piece, there will be 3 parts the screw part (cant remember the name) a spring and the connection pin itself
The spring melts at sub-ohm builds and shrinks at regular low ohms so it must be pulled out to length to match the original length, but for the mod to work perfectly the base of the plastic insulator must be trimmed down a bit so that the spring will press hard on the connection pin, after this the mod will hit harder and the problem will be solved... at least for a while...
__________________________
M16 helio 0,29
Galileo aqua 0,8
Bolt carto tank
Vamo vivi/protank
Kts+ igo-w 0,7
The little plastic insulator that holds the 510 connection pin must be trimmed down in size
Screw it out and pop out the screw piece, there will be 3 parts the screw part (cant remember the name) a spring and the connection pin itself
The spring melts at sub-ohm builds and shrinks at regular low ohms so it must be pulled out to length to match the original length, but for the mod to work perfectly the base of the plastic insulator must be trimmed down a bit so that the spring will press hard on the connection pin, after this the mod will hit harder and the problem will be solved... at least for a while...
__________________________
M16 helio 0,29
Galileo aqua 0,8
Bolt carto tank
Vamo vivi/protank
Kts+ igo-w 0,7
