Genesis Vortex Generator

[rolf]

dr ma
jes no leaking and the draw is just perfect for me.the bottom juce tank did not work out to good ..I was trying to cast o rings but gave up on that ...so I repurposed this top chamber. more experimenting .
ps the mold making silicone certified food grade and good to 400 degrees ! also the epoxy resin usda food grade.

 

[DrMA]

Cool. Can you please post links to where you got the food-safe silicone and epoxy?

 

[rolf]

hi dr ma
the 2 part silicone is for mold making and is from ...makeyourownmolds so it releases anything ! even superglue wont stick.
the epoxy is called...max clear-hp ...high performance and got that on ebay.
so...Mold Making, Food Grade Silicone Mold Rubber & Mould Supplies all their products are used in the cullenari industry .
the epoxy resin is allways on ebay but here is their fone number ...909-673-16005
have funn

 

[DrMA]

Thanks, rolf.

 

[rolf]

dr ma
u r welcome !
on qwestion on your build ....is the tube for directivity air in addition to the direct hole ?or is that the only air intake with nothing hitting the coil direct? sure want to try to play with it . tried to make an atty from an rca plug once ...with some medical tubing for the juce ..flexible for a pipe. with the air chamber so small it vaped to harsh ...want to try your system on my aga t and agi attys.
so far my favored atty is the did clone I think it has the right size air chamber .

 

[DrMA]

The tube is the only air intake. But it does actually point directly at the coil. If I look into the air tube from the outside I can see the top of the wick and coil directly in front of it.

 

[rolf]

thanks dr ma !!
waiting for the dna 20 ...still sold out...in the mean time will play with some atty ideas.
ever visit Spokane ?

 

[asdaq]

I visited 2 years ago, and in over a month of visiting the Pacific Northwest, one of the few vapers I saw was at that old carousel in the downtown area. Some box mod IIRC.

Sent from my Nexus 4 using Tapatalk 4

 

[rolf]

hi asdaq!
ja I was there a week ago it was the pigout at the park event. a lot of food booths and life intertainment.met acouple of vapers to .there are more all the time.you know Bremen Germany ?that's where I was born . my sister in Germany cant find a vape store there !!
trying to get her off the nasties ...she should know better...she is a doctor!
have funn

 

[StrappedKaos]

I want to add alittle about what I have learned over the years of building manifolds and such.( even worked with a Nascar team to help them)
Consider the length and diam. of the tubes used to create a vortex, changing those aspects can have a dramatic effect.
I have considered this idea but creating a velocity stack and venturi also just never had time, consider the intake tube and consider the idea of groves inside that tube to create a "spin" from air entering even a stack on incoming side and that can help create a venturi. Also consider that the air coming in is only as effective as air going out....Don't forget both aspects of this design, Focus on air coming out as well because if it creating positive pressure in the tank it could do more harm than good. Keep in mind that you do not have to pull air from the side but also you can pull air from the top and suck from the side directly from the coil....that has what I have been working on for a new design. Try pulling from the drilled air hole with no drip tip in top and tell me what you think, it is hotter but the flavor is amazing. I have a great design but will not give info for it will be cloned in no time so just use it for my own vaping... Strapped

 

[DrMA]

Interesting ideas, Strapped. Thanks for sharing.

 

[rolf]

thanks for chiming in strapped !
when I build my atty I was not thinking about airflow theory like laminar or anything .the reason for the intake air from the top side was to not be hit with hot air hitting my chin like a needle. and it achieved it nicely . also got about 90 pieces of 4 foot pirex tubes and it is a nice way to enter air from the top drawn from the sides . solved that problem nicely! that's when dr ma wrote about using a angled tube to direct air flow to create a rotation and turbulence going I thout about it ..and the more I think the more I like it . of course the drip tip needs to have a good hole in it draw ...air drawn out = air flowing in .for me two stainless tubes have the right draw for me . I will try that with my aga t ..creating turbulence was the side effect on my build . played wit laminar flow but in airfoils when I was bulding sailplanes ..hard to acheve and even dust and bugs will ruin laminar flow I don't worry about it ....this system gets a rotaion and turbulence going and it sure works. with out a drip tip ? once by mistake ..after I burned my lips I did not think of flavor improvement
just having fun