Genuine joyetech eGo PassThrough 650mah 3.3v - Stainless, Blue, Red, Purple
GENUINE Joyetech 650mah eGo-T 2 Upgrade Pass Through! Dual Voltage 3.3 & 3.7v
NOW ALL EGO-T batteries ARE EGO-T UPGRADE: This means that the battery can switch between 3.3v constant voltage to 3.6-4.15 varyign voltage (depending on the charge of your battery). <
How To Change Between Regulated Constant and Unregulated Modes on the Joyetech eGo-T Upgrade:
- Normally all eGo-T batteries come in the off position. Click five times to turn the unit on and off of course.
- Once in the OFF position, press the power button and hold for about 5-6 seconds until the button led flashes three times: If it changes color to ORANGE you are in UNREGULATED mode which will provide you with voltage between 3.6v to 4.15 volts depending on your batterees remaining charge. If it changes color and flashes BLUE three times you have switched it to REGULATED mode, which is a constant classic 3.3v mode.
- Once you have changed your modes, the unit is still off. You will then need to click the button five times to turn it back on. Remember, ORANGE fire button means you are in Unregulated mode, while BLUE means you are in the constant eGo mode of 3.3v.
- Click five times at any time to turn your unit off for storage.
- THATS IT!
Incredible convenience is afforded by this Genuine Joyetech 650mah eGo PassThru e-cigarette which allows you to hook it up to your USB port while sitting at your computer and vape away. The battery within the pass through actually charges as you are using it.
Unscrewing the stainless steel cap at the bottom of the eGo pass through reveals a usb port that you plug your provided six foot USB cable and the other end plugs into one of your computer's usb ports. There is a red indicator light that turns on while it is charging and turns off when the charge is complete.
The battery is rated at 3.3v constant voltage so there is no drop-off in performance until the battery shuts down. The button on the eGo begins flashing when a re-charge is needed and at that point you can simply reconnect it to your computer. When you first get your eGo pass through it is recommended to attach it to your computer's USB port and let charge a full 5-6 hours, during which though, you can use the product.
As one of the founders of GotVapes.com I, the person writing this product description, personally use my eGo pass-through on a regular basis. I leave it plugged in while working then when I have to make a run out of the office I simply unplug the eGo pass-through from my computer, screw the bottom cap back on and go!
The battery in the eGo pass-through is rated at 650mah and will provide easily 6-8 hours vaping on a fully charged battery more depending on your vaping habits. This kit is available in black and stainless with and without eGo cone covers. Make your choice in the drop down box below.
This features 5 click on/off protection. Generally it is shipped in the off position so make sure you click it five times to turn it on when you get it!
