GG,GGTS, Penelope Dual Coil .8 ohm

[Bishopheals]

GG, GGTS, Penelope Dual Coil .8 ohm


How to video on how to make a .8 Dual Coil for the lovely Penelope.


Parts needed:
2 and 1/2 inches of 32 gauge kanthal wire cut in half
4 inches of pure silver wire cut in half
1 tweezers or pliers.
2 inches of 3.5 wick


1 18650 AW IMR battery 3.7 Volts

http://www.e-cigarette-forum.com/forum/gg/330465-gg-ggts-penelope-dual-coil-8-ohm.html

 

[Bishopheals]

keep in mind guys this is a little over 15 watts so it will out perform the kick and a Darwin do there limitations of 10 watts.

If you find it a little hot which you might if you like to vape at 5 watts etc. then you can adjust the dual coil instead of 2 1/2 inches cut 2 3/4 inches or even 3 inches and cut that in half and dual coil it. It will increase the ohms from .8 -1.5 which will reduce the wattage a bit. something to play with in finding your sweet spot. @ 1.5 ohms you will get about 9.13 watts.

 

[The Hill Giant]

I made some adjustments to mine to make it 1.2 ohms, and it's been spot on for me. Thanks again Bishop.

 

[Bishopheals]

there u go. awesome

 

[Roxxette]

The best thing of these "hot" coils is that you can have better run time out of your battery and hardly feel the voltage drop.

 

[R53_Dave]

The best thing of these "hot" coils is that you can have better run time out of your battery and hardly feel the voltage drop.

Just have to keep an eye on the batteries voltage so you don't over discharge them.