GG Stealth with Bulli problem

[cliffy1]

Hi guys I have just acquired a Bulli A2T but having a BIG problem it wont work at all on the Stealth, it works fine on all my other 510 ecigs,the problem is the atty connection pin on the Stealth cannot be adjusted down far enough to make contact with the bulli connection. Anyone else have this at all?all my other 510 attys work fine on the stealth,so i`m alittle baffled Help!

Whoops hope its ok to mention Bulli

Ps
Also same on the TB/TS but fine on anything not GG

 

[camperman]

This problem exists with a few different atomizers on the stealth i think as i have 3 stealth caps, 2 run ce3 and ce2s but one wont but works perfect with an i-atty and UFS and no matter what i do with it i cant get it to run any of the ce familly without using a 510 to ego adaptor

 

[cliffy1]

This problem exists with a few different atomizers on the stealth i think as i have 3 stealth caps, 2 run ce3 and ce2s but one wont but works perfect with an i-atty and UFS and no matter what i do with it i cant get it to run any of the ce familly without using a 510 to ego adaptor

It has to do with the length of the pin I would have thought.Hopefully someone will come up with an answer for us both.

 

[Poppa D]

Have you tightened the pin?

 

[cliffy1]

Have you tightened the pin?

Yes I have. roll on the Odysseus

 

[imeothanasis]

Are you able to messure the distance from the cap's surface to the pin cliff?

 

[cliffy1]

Are you able to messure the distance from the cap's surface to the pin cliff?

I havn`t got anything that will measure into the cap that accurately ,but what I have noticed that if I use 901/510 adapters on the TS it works ok the adapters internals move so make a contact to the tank.
I will work out a way to do that though Imeo, but I dont have anything to measure that small a distance.

 

[camperman]

It has to do with the length of the pin I would have thought.Hopefully someone will come up with an answer for us both.

Yer its definitly the pin cliffy as id swapped them around in the various caps i have to see if theirs any difference and id narrowed it down to 1 of the centre pins.

 

[cliffy1]

Its not a big deal as I can use it on a Don or my ego`s and await your upcoming release unless you can supply 2 slightly longer centre pins 1 for the TB and 1 for the stealth

 

[imeothanasis]

I dont have longer pins clif but its a strange issue because every other mod has a distance of 4mm and Stealth has a distance of 3,9 mm to make contact every time. Are you sure that pin is totally screwed?

 

[NexPax]

The A2-T works on my Stealth.

 

[cliffy1]

I dont have longer pins clif but its a strange issue because every other mod has a distance of 4mm and Stealth has a distance of 3,9 mm to make contact every time. Are you sure that pin is totally screwed?

Yes its all the way Imeo, it is strange but Camperman says he has the same problem, its no problem Imeo if you havn`t got different pins.........sob! sob! I will have to use on something that's inferior to the GG.

 

[NandyDC]

Thats not a problem of the GG Stealth but the Bulli problem. Same happends to me but not only with the Stealth, also with Ego batts. The problem is the center post of the bulli is so soft that other mods push the post to far in that it doesnt make contact again on like says stealth or ego batts. What I do is to gently pull back out the center post and Im ready to go.

 

[cliffy1]

Ok well give that a bash thanks, not at home at the moment .........doing dreaded xmas shopping with my wife...................... being dragged around something rotten lol

 

[Para]

Thats not a problem of the GG Stealth but the Bulli problem. Same happends to me but not only with the Stealth, also with Ego batts. The problem is the center post of the bulli is so soft that other mods push the post to far in that it doesnt make contact again on like says stealth or ego batts. What I do is to gently pull back out the center post and Im ready to go.

True...and the same with his 901 connectors on the A2. They want to settle in just a bit too far up to make contact. One work around is to extend the center pin of the stealth top just a bit.

I run into the same issue with some of the one piece center post adapters so I solder a copper post that extends it about .2mm. You can do the same to the A2 if you don't want to mod the Stealth pin....it's just easier mod it.

*sorry for the flash washout*....here's a pic of an adapter with the mod.

Once done I don't have to fiddle with adjustments.

Hope that helps

 

[Juan-nitro]

Hello.
The problem is the positive pin Bulli.
You should get the pin out a little with a small screwdriver watchmaker.
Best Regards.

 

[cliffy1]

Yes !! that was the problem all sorted out now Thank you guys