give me the skinny on vv reo

[valooper]

Okay so I am looking at the reo grand lp but I got my ipv 2 in and love the adjustability of vv/vw

So rumors have it that there is a vv reo can some point me in the right direction please

Here is my list for what I was gunna buy:Reo grand low pro 156.00 white outside black wrinkle door reosmods.com
Repair kit 25.00 reosmods.com
2x 6ml bottles .65 each reosmods.com
2x 6ml bottle tubes 2.00 each reosmods.com
Aluminum button 6.00 reosmods.com
Reomizer 4.0 = 45.00

But is this vv model the bees knees
For someone like me that's in love with vv/vw devices?

Does thus use a chip? Kicker? What's the dealo?

Things I want:
To sub ohm
to blow massive clouds
Not have to drip and drive
Use a variety of rdas
Run a rda in single/dual/quad mode

Thanks

 

[valooper]

Also has anyone put like a sx350 chip in a reo before?

 

[pennysmalls]

I have a VV Grand but only because it went up for sale in the classifieds. Apparently they aren't made anymore. If you're looking to go sub-ohm then the VV model wouldn't work for you anyway. I can't remember what the exact limit was right this second but I was warned not to go below a certain ohm level because the unit would shut down, and that warning came directly from the Reo master himself. I want to say it was right about 1.7 ohm, or very close to that.

Edited: I was wrong, Rob did not state an ohm limit, just suggested I stay close to 2 ohms or upwards.

 

[pwheeler]

The vv Reo Grand is no longer made. You can still find them listed on the classifieds from time to time. The LP Grand will do all the things on your list depending on how you build your atty. The LP will accept any bottom feed atty. Rob has some on his site at reosmods that are triple post for dual and, I guess, quad coils. The mod itself will handle just about whatever you throw at it. The limiting factor would be whatever battery you are using in it. That shopping list looks good, but it's all strictly mechanical, no chips, no kicks, although I've heard that one will come out that can use a kick, but not sure.

 

[supertrunker]

It's no longer made.

It runs to 15W, but you'll have to source a used one on the classifieds.

T

 

[valooper]

Well damit lol alright thanks guys

I am trying to access classified section but those options for verification are difficult for me

 

[valooper]

Wait so that reo 4.0 is air flow adjustable for dual only or dual and single?

 

[supertrunker]

Both - it's an Atomic clone.

T

 

[valooper]

Both - it's an Atomic clone.

T

Thats what I was after thanks

 

[turbocad6]

Also has anyone put like a sx350 chip in a reo before?

I'm just finishing up an sx350 install in my reo. I did a few dna's before, but this is the first sx350. the sx350 is a really nice chip, they just released the 60 watt upgrade for it today

 

[valooper]

I'm just finishing up an sx350 install in my reo. I did a few dna's before, but this is the first sx350. the sx350 is a really nice chip, they just released the 60 watt upgrade for it today

I am highly interested in this can you please pm me or something lol .......pretty please!!!

 

[turbocad6]

I only meant to answer your question of has anyone put an sx350 into a reo ever, I don't build anything to sell. I just modify them for my own use

if you want help or guidance of how to do it yourself I'd be willing to help, then it all comes down to how much patience you have and how bad you really want it

a mech reo is still a great vaping machine. if I couldn't build it into a regulated mod then I'd still be using it as a mech. a regulated chip is a luxury but not a necessity really

 

[valooper]

I only meant to answer your question of has anyone put an sx350 into a reo ever, I don't build anything to sell. I just modify them for my own use

if you want help or guidance of how to do it yourself I'd be willing to help, then it all comes down to how much patience you have and how bad you really want it

a mech reo is still a great vaping machine. if I couldn't build it into a regulated mod then I'd still be using it as a mech. a regulated chip is a luxury but not a necessity really

I know exactly what you mean and no I am a hands on guy I am looking for advice on

Where to get parts
Whats needed

For thr modification lol I don't wsnt to buy one that take all the fun out of it

I just really like the regulated mods

 

[el Jexican]

Someone made a thread a few weeks ago where they put a DNA30 (I think) in the Reo, with plenty of pictures. It was a thing of beauty.

 

[mackman]

Here is the thread: http://www.e-cigarette-forum.com/forum/reos-mods/584809-dna20-inside-reo-grand.html

 

[turbocad6]

I know exactly what you mean and no I am a hands on guy I am looking for advice on

Where to get parts
Whats needed

For thr modification lol I don't wsnt to buy one that take all the fun out of it

I just really like the regulated mods

awesome sorry but I'm much more used to people saying they want it but can't build it yeah there is a recent thread from a guy who put a dna30 in the base of a metal reo which is a very cool idea. I did a dna20 in a metal reo myself but I didn't fit it internally, I built an extension for the base which made the reo taller. the dna chip is a bit more compact and versatile, but limited to 30 watts which honestly is enough really, although the sx350 chip with 60 watts is def cool too, but a bit larger.

since building a metal reo I've really gotten into the wood mods and honestly I think it's easier to put a chip in a wood reo than a metal one, but of course either can be done depending on what you want. what you need is fairly simple, the chip and some wire and perhaps a new switch, everything else comes down to which chip you use and where you actually put it. I've done it with a chip fully inside of the body and I've done it where the chip is almost external, with a finishing cap to cover it afterwards... the dnas can be built completely into the inside of the mod if you want that, where the sx350 is large enough that it would have to be more like half in/half out.

here's a few examples


this is how I fit the sx350 to the wood reo

and here's an example of internal vs external mounting of the dna

and this one shows the dna install into my metal reo in the background too

so there are options depending on what kind of reo you use and what chip you use and where you want to put the chip. I guess decide what you want and how you want it would be the first step

 

[supertrunker]

Turbo is being a little modest. He has put DNA 30s in a Reo vv and a Woodvil. Nag him some more and he'll post the pics!

They are both outstanding.

T

 

[supertrunker]

Ninja'd! lol

T

 

[valooper]

This is a sweet deal thank you I am going to gather all this info and buy a reo with the sole purpose of doing this

I agrrr the wood reo would be easier to do but all the ones I want are out of stock and I like the metal ones as well I think putting a chip in a reo just makes itbest of all worlds

 

[Raynman]

Woodvils are a rare treat Rob only makes them every so often. Last sale was the end of Feb. The next run should be in Dec. although that is not promised. I'd watch the classies as they pop up there from time to time.