Good place to buy atomizers?

[4Yankee]

I know avid vaper, but where else? Primarily looking at joye unless you guys can recommend anything besides those or the Cisco / hh. Also what in your opinion is the primary difference between 510 and 306?

Sent from my mind using telepathy

 

[jifjifjif]

Personally, I always preferred 306 to 510. The Ciscos from Avid is what I used. The 306 has the bridge that pops up out of the atty. I'm not sure why I preferred it better, but I really did.

if you can wait a month, I would suggest fasttech for atomizers because of the price.

 

[Funk Dracula]

Atomizers

KP Long Barrel Unsealed Atomizer - Kidney Puncher

 

[4Yankee]

Funk dracula, if you could only use one. ... which?

Sent from my mind using telepathy

 

[Funk Dracula]

Funk dracula, if you could only use one. ... which?

LR306 Low Resistance Atomizer 1.5 ohm (Cisco Spec) - Avid Vaper


edit - If your not familiar with the 306, make sure you get the proper drip tip to go with it.

http://www.avidvaper.com/categories/Drip-Tips/306-Drip-Tips/

 

[4Yankee]

LR306 Low Resistance Atomizer 1.5 ohm (Cisco Spec) - Avid Vaper


edit - If your not familiar with the 306, make sure you get the proper drip tip to go with it.

http://www.avidvaper.com/categories/Drip-Tips/306-Drip-Tips/

About that. Do you have any experience with metal 306 drip tips? I've heard horror stories about melted plastic ones. Could you shed some light?

Sent from my mind using telepathy

 

[jifjifjif]

I never melted a plastic 306 drip tip. There is also a 306 to 510 drip tip adapter that enables you to use any 510 drip tip on a 306 atomizer.

 

[jrenae4]

I never melted a plastic 306 drip tip. There is also a 306 to 510 drip tip adapter that enables you to use any 510 drip tip on a 306 atomizer.

I use the adapter and I love it! 306s all the way

 

[jifjifjif]

Until I got my RM2, this is what I did exclusively. Cisco 306 with the 510 drip tip adapter.

 

[jifjifjif]

Yankee, if you want to click on my picture and then once in my profile, click on "vaping pictures" on the left, you will see that the firsst picture is of 5 mods. Enlarge the pic and see that the 1st two mods on the left are both using the 306 to 510 drip tip adapter with 510 drip tips on top.

 

[Funk Dracula]

About that. Do you have any experience with metal 306 drip tips? I've heard horror stories about melted plastic ones. Could you shed some light?

??????

I've never heard of a 306 tip melting... however if you shove them down hard enough they can crack up the side.

No experience with a metal 306 tip, I just have a couple plain-jane black ones.

I haven't really used 306's with my Reos, honestly. The RM2 is too much awesome sauce atop the Reo for the 306 to compete.

I do however still love to drip a few flavors on 306's every now and then while at home watching tv. I just got a super cheap ($50) and tiny 14500 VMOD I plan on putting 306's on to have just laying around on the coffee table at home.

I'm totally remembering you now from the general forum. Congrats on making the move to Reo BTW.

Might I suggest you initially purchase both a 306 and a 510 atty and then decide which one you prefer?

I prefer the 306, because it's warmer and has a more exaggerated flavor to me. Some people prefer a 510, as it is slightly more convenient. No fussing with drip tips and it generally holds a bit more liquid before having to drip again.

Cheers

 

[wongster360]

306's definitely provide a warmer vape than 510's. I vote for the Cisco spec 306's as well. Occasionally I'll run across a place that has bulk Joye 510's for sale usually 5 for $20. If you want the most bang for your buck though, get a bottom fed RDA like the RM2 or Cyclone. Build your own wick the way you like to vape and once you have it the way you like much, much cheaper way to go.

my .02

 

[4Yankee]

Yankee, if you want to click on my picture and then once in my profile, click on "vaping pictures" on the left, you will see that the firsst picture is of 5 mods. Enlarge the pic and see that the 1st two mods on the left are both using the 306 to 510 drip tip adapter with 510 drip tips on top.

Muchas gracias

Sent from my mind using telepathy

 

[4Yankee]

??????

I've never heard of a 306 tip melting... however if you shove them down hard enough they can crack up the side.

No experience with a metal 306 tip, I just have a couple plain-jane black ones.

I haven't really used 306's with my Reos, honestly. The RM2 is too much awesome sauce atop the Reo for the 306 to compete.

I do however still love to drip a few flavors on 306's every now and then while at home watching tv. I just got a super cheap ($50) and tiny 14500 VMOD I plan on putting 306's on to have just laying around on the coffee table at home.

I'm totally remembering you now from the general forum. Congrats on making the move to Reo BTW.

Might I suggest you initially purchase both a 306 and a 510 atty and then decide which one you prefer?

I prefer the 306, because it's warmer and has a more exaggerated flavor to me. Some people prefer a 510, as it is slightly more convenient. No fussing with drip tips and it generally holds a bit more liquid before having to drip again.

Cheers

Gaaaah!!! I'm not there yet! Fingers crossed I have a guy interestedin my hammer, should find out if he's buying by this evening.

Sent from my mind using telepathy

 

[4Yankee]

Also, is it a big flavor difference between 306 and 510? I'm coming from a protank running 1.5 to 1.8, so I'm sure any old atty is gonna blow the doors off of what I'm used to.

Sent from my mind using telepathy

 

[jifjifjif]

Flavor is slightly better for me on a 306, but warmth and throat hit and vapor were always mmuch better to me.

And yes, they will blow the doors off a Protank head.

 

[Filthy-Beast]

I've not used recently but di really like Ikenvape's atomizers and he's got a pretty loyal following. Here's his thread. http://www.e-cigarette-forum.com/forum/ikenvape/509760-ikenvapers-chat-door-open-everybody-come.html

My ADV is his RY4 Gold, been vaping it for about 2 years, nothing else compares.

 

[nerak]

BULK 901 801 Joye 510 and 306 atomizers

These were my go to atomizers. I used the 510 and 306 L.R. 1.5. Lasted a long time and worked well.

But my vape was taken hostage by the RM2. It never let me go!

 

[CreepyLady]

Imma add a +1 on the KP long barrel unsealed. With RM2 and now Hornet, they are the only ones I still keep on stand by.

 

[MamaTried]

BULK 901 801 Joye 510 and 306 atomizers

These were my go to atomizers. I used the 510 and 306 L.R. 1.5. Lasted a long time and worked well.

But my vape was taken hostage by the RM2. It never let me go!

i'm tempted to buy some of those.

i have too many Reos to put a RM2 on all.

and making coils is a biatch until i have my eye surgery.