Got my stingray and kraken today!

[humangraffiti]

Hey guys!

I got my stingray clone today as well as my kraken clone!

Gotta say in pretty impressed with the stingray, compared it with a real stingray and it looks really good!

Im just a little disappointed with the kraken, i expected a little more vapor from it, works great tho at ~ 1.33 ohms.

Any thoughts?


Sent from my iPhone using Tapatalk

 

[Nikkita6]

Gotta be something off with your build or e liquid maybe? The Kraken and "little vapor" seem like an oxymoron ... Anyhoo, I have this set up as well, and its a very nice pairing, so its worth it to work on your Kraken build.

 

[v1k1ng1001]

I received my stingray clone this week and it is pretty awesome. The button is a little crunchy but that can be remedied this weekend. Amazing value.

 

[Nudzacysie]

Man oh man my kraken be blowing some huge ones....then again I have twisted 26g dual coil build inside but man honestly works about the same as some of these drippers that I have seen around....even at some vape shops they be looking at me like .......lol I also run 100% vg only with cotton u wickm

Check it out

 

[Tinkiegrrl]

Low vapor on a Kracken? Vapor has never been an issue with mine, but taste was a huge issue until recently. Finally managed to get a good coil on it. Ohms at about .9. Microcoil with cotton wick. Loving it right now, and it seems to be the perfect size for my precious... I mean, my Provari.

 

[humangraffiti]

Man oh man my kraken be blowing some huge ones....then again I have twisted 26g dual coil build inside but man honestly works about the same as some of these drippers that I have seen around....even at some vape shops they be looking at me like .......lol I also run 100% vg only with cotton u wickm

Check it out

Damn nice. Im using the string that looks like the wick for iclears, i forgot what its called. Ill try the tiger coil for it soon and see how it is


Sent from my iPhone using Tapatalk

 

[humangraffiti]

Low vapor on a Kracken? Vapor has never been an issue with mine, but taste was a huge issue until recently. Finally managed to get a good coil on it. Ohms at about .9. Microcoil with cotton wick. Loving it right now, and it seems to be the perfect size for my precious... I mean, my Provari.

What build r you using? Id love to try it!


Sent from my iPhone using Tapatalk

 

[humangraffiti]

Gotta be something off with your build or e liquid maybe? The Kraken and "little vapor" seem like an oxymoron ... Anyhoo, I have this set up as well, and its a very nice pairing, so its worth it to work on your Kraken build.

Yeah idk maybe its just me being picky or my build is not very good fr it


Sent from my iPhone using Tapatalk

 

[Tinkiegrrl]

I just wrapped my coil around a paperclip about 9 or 10 times. 28 gauge kanthal. You take a paperclip and bend down the wire at a 90 degree angle from the rest of it. Like the picture below.



Loop one end of the kanthal where the paperclip loop. Then wrap your coil around the part of the paperclip you bent down. You can get it pretty tight this way. Makes a nice, even, coil. Remove the coil and hold it together with tweezers and use a blow torch or whatever source of fire you've got to set the coils and burn away any machine oil or contaminates. Set the coil in vertically, and dry burn without the wick. You can use tweezers while you're dry burning as well to squeeze the wraps together so that they're touching, but not overlapping. As you are dry burning, make sure that the coil is glowing from the middle, outward. Leave the piece of cotton thicker on the top and thin on the bottom to make it easier to thread. Pull the cotton through the coil and the deck of the Kracken until the thick part is snug in the coil. Trim the top of the cotton. Prime, fill the tank, and vape!

 

[NoMoreCope]

Running a .85 single 26ga micro coil, with #500 mesh, in my Kraken as we speak. Pretty decent flavor and vapor for my first successful mesh build... Was running cotton, but this is much better so far. Could wick a little better though, I think, so I'll be working on it.

Sent from my DROID RAZR HD using Tapatalk

 

[humangraffiti]

I just wrapped my coil around a paperclip about 9 or 10 times. 28 gauge kanthal. You take a paperclip and bend down the wire at a 90 degree angle from the rest of it. Like the picture below.

View attachment 328813

Loop one end of the kanthal where the paperclip loop. Then wrap your coil around the part of the paperclip you bent down. You can get it pretty tight this way. Makes a nice, even, coil. Remove the coil and hold it together with tweezers and use a blow torch or whatever source of fire you've got to set the coils and burn away any machine oil or contaminates. Set the coil in vertically, and dry burn without the wick. You can use tweezers while you're dry burning as well to squeeze the wraps together so that they're touching, but not overlapping. As you are dry burning, make sure that the coil is glowing from the middle, outward. Leave the piece of cotton thicker on the top and thin on the bottom to make it easier to thread. Pull the cotton through the coil and the deck of the Kracken until the thick part is snug in the coil. Trim the top of the cotton. Prime, fill the tank, and vape!

Thank u so much! Ill try this out when i get home


Sent from my iPhone using Tapatalk

 

[Nudzacysie]

Damn nice. Im using the string that looks like the wick for iclears, i forgot what its called. Ill try the tiger coil for it soon and see how it is


Sent from my iPhone using Tapatalk

Yeah just be careful with what you build cuz the build i have is super sub ohm

 

[humangraffiti]

Yeah just be careful with what you build cuz the build i have is super sub ohm

What ohm u vaping at with the kraken?


Sent from my iPhone using Tapatalk

 

[Nudzacysie]

.25 heats up like a ..... though but I got an insulated tip and am running an mnke 18650

Sent from my SGH-T999 using Tapatalk

 

[humangraffiti]

.25 heats up like a ..... though but I got an insulated tip and am running an mnke 18650

Sent from my SGH-T999 using Tapatalk

Wow! Very impressive! Does urs happen to leak whenever u tilt it?


Sent from my iPhone using Tapatalk

 

[Nudzacysie]

Wow! Very impressive! Does urs happen to leak whenever u tilt it?


Sent from my iPhone using Tapatalk

You know what it has but only once but that time I was using a 70 vg 30 mix and I left it tilted over night but since then naw it hasnt I use straight vg now though and sometimes can't get it to wick right

 

[humangraffiti]

You know what it has but only once but that time I was using a 70 vg 30 mix and I left it tilted over night but since then naw it hasnt I use straight vg now though and sometimes can't get it to wick right

Oh wow so lucky! Mine drained my whole 10ml liquid in two days. Idk whats wrong


Sent from my iPhone using Tapatalk

 

[jwag1973]

Congrats on the combo, I have the same one and love it. I built a 1.1-ohm single coil with 28 gauge wire, plenty of vapor production. The Kraken is an excellent tank. Try another build or two, when you find one you like you'll love the Kraken. I have four of them and keep one with me at all times.

 

[humangraffiti]

Congrats on the combo, I have the same one and love it. I built a 1.1-ohm single coil with 28 gauge wire, plenty of vapor production. The Kraken is an excellent tank. Try another build or two, when you find one you like you'll love the Kraken. I have four of them and keep one with me at all times.

Wow yeah might as well try different ones. As soon as i get the kanthals i can start building thanks mate


Sent from my iPhone using Tapatalk

 

[Nudzacysie]

Oh wow so lucky! Mine drained my whole 10ml liquid in two days. Idk whats wrong


Sent from my iPhone using Tapatalk

Sometimes its your coiling I go through about 5ml of liquid a day but its alright because I used to go through about the same with my aerotank