Great! / Annoying news.. need y'alls help

[khantron]

So, heard a new vape shop was opening up close by, decided i would take the train down there and check it out, walked in and all the employees were clapping.... i was first customer through their doors ever, and as such they had a prize for me............ kayfun LITE!!!!!! So im pretty novice rba/genny rba user, my question is why cant i get the damn kanthal to stay under the posts when screwing them down super super super annoying... really excited to use this awesome unit but bummed that i have had to rebuild the coil/wick like 8 times cuz the kanthal WILL not stay under the post screws... noob move but any advice ??

 

[FlamingoTutu]

Cool that they gave you that. I have no idea but I'll give it a bump so somebody can answer.

 

[HughDaHand]

What a door prize, I'm jealous. What I usually do when I have this problem is leave the legs a little long and wrap the leg around the screw so that it makes a circle under the screw head. That makes it tougher for the wire to slide out as you tighten it down. Then Just trim the extra off after you tighten the screw. Hope that helps out a little, just keep at it you will get it down in no time.

 

[Thrasher]

the kayfun light sucks, send it to me so I can dispose of it properly for you



when coiling it make sure the leads are long enough to hold onto and wrap them all the way around while holding them tight i do a good half circle around the screw holding it with one hand and screwing it down with the other.

 

[Asbestos4004]

the kayfun light sucks, send it to me so I can dispose of it properly for you



when coiling it make sure the leads are long enough to hold onto and wrap them all the way around while holding them tight i do a good half circle around the screw holding it with one hand and screwing it down with the other.

damn nice try! Coffee came out of my nose!

 

[badowden]

How to build a Kayfun by SvoëMesto // Vape Rev EDU - YouTube

Watch this video- she does a really good job of explaining it. She is rebuilding a kayfun 3.1 but its the same general method.