Guys pls help me!

[tigerfeng15]

I rebuild my tfv4 single rba using 24awg wire but when i connect to my mode(subox mini) why i get 9.9ohm?

 

[xqae24]

something is lose in your whole setup.
subox mini normally shows 9.9ohms when they cannot detect any connection.

Check to see all your screws are tighten.

 

[goodvapesonly]

Sometimes your coil might be touching the RBA base, or the cap. Explore that possibility if you're sure that your connections are tightened, and the problem still occurs.

 

[tigerfeng15]

something is lose in your whole setup.
Subox mini normally shows 9.9ohms when they cannot detect any connection.

Check to see all your screws are tighten.

I learn from youtube and follow all the steps but still got 9.9ohm

 

[tigerfeng15]

Sometimes your coil might be touching the RBA base, or the cap. Explore that possibility if you're sure that your connections are tightened, and the problem still occurs.

all checked everything ok but still got 9.9ohm, trying to upload photos to here but cant

 

[goodvapesonly]

You need to get your post count up to 5 before you can post photos.

 

[tigerfeng15]

You need to get your post count up to 5 before you can post photos.

this post counted too? haha

 

[NewToVaping]

check your screw and coil. Is your coil touching any part of your RBA? screw everything in tightly.

 

[goodvapesonly]

@tigerfeng15 Do you have another RTA? Try connecting that with your kbox mini and see if it still shows up as 9.9 ohm. Then you can effectively eliminate that it is a 510 connection problem.

 

[tigerfeng15]

 

[ChasingTheCloud]

Try tightening the rba ?

 

[tigerfeng15]

@tigerfeng15 Do you have another RTA? Try connecting that with your kbox mini and see if it still shows up as 9.9 ohm. Then you can effectively eliminate that it is a 510 connection problem.

no i dont have

 

[tigerfeng15]

Try tightening the rba ?

tighten to the max alr

 

[ChasingTheCloud]

tighten to the max alr

try recoiling again? i mean like take out the coil and fixing it back and hope for the best

 

[tigerfeng15]

try recoiling again? i mean like take out the coil and fixing it back and hope for the best

done but still got 9.90hm

 

[tigerfeng15]

nvm guys i think i go buy new coil change see can anot thanks!

 

[goodvapesonly]

Do update us on your findings, so that we know how to advise others in the future!

 

[ChasingTheCloud]

I rebuild my tfv4 single rba using 24awg wire but when i connect to my mode(subox mini) why i get 9.9ohm?

oh and maybe your 510 pin is pushed down?(not really sure tho) and that is why it cant read the resistance? Because the subox mini doesnt have a springloaded 510 pin.

 

[marauder]

Happened to one of my buddies. Definitely 510 connection.
Unless your atty 510 can be adjusted, you'd have to get a spring loaded mod

 

[trdjun]

lol. tfv4 on a kbox mini.