Had KangerTech Evod less than 2 days and already have problems

[NewSmok3r]

I bought my Evod and so far no good. Very unhappy. Whenever I use it it will start to leak onto my battery. No idea what to do. Please help a new vapor out.

 

[Dakota Jim]

Kanger evod? or a knockoff?
is the atomizer head screwed down tight inside?
how much is it leaking over what time frame - 1/2 drop to 1 drop over several hours is normal
it is not flooding is it? gurgling when you vape
if the bottom is unscrewed a little from the main body it breaks the vacuum and it may leak
did you modify the head? ie: remove flavor wicks?
is the little washer still right above the threads on the atomizer head itself?

 

[NewSmok3r]

pretty sure it is not a knockoff, it has kangertech evod engraved at the bottom. It is flooding, 2 and a half drops every time I take a hit. No modding what so ever. I make my own e-liquid. 65% VG, 15% water, 20% flavor. Could that effect it?

 

[AegisPrime]

pretty sure it is not a knockoff, it has kangertech evod engraved at the bottom. It is flooding, 2 and a half drops every time I take a hit. No modding what so ever. I make my own e-liquid. 65% VG, 15% water, 20% flavor. Could that effect it?

The Kanger heads are pretty susceptible to flooding with thin liquids and dry hits with thicker ones. 70/30-50/50 PG/VG mixes seem to be the sweet spot - thinner than that and you'll get gurgles, thicker and you'll need to remove one or both of the flavour wicks to prevent dry hits. Since you're getting flooding, maybe try a little less water in your mix?

Also, a drop or two of liquid on the battery is normal throughout use - there's an air hole in the bottom of the Kanger head and gravity is as gravity does