- Status
I have mine on a pretty stand. Went through two lipos and never got another one again. What's wrong with it?
no idea how what you did with yours is of any help at all
processer bridge cracked . thinking you can't answer my ?? eh
I agree. Contact the manufacturer. But, if you can, get a new one because lipos are permanently out of stock.
Someone was selling clouper t8s for dirt cheap here recently. They’ve got dna 200 boards on them. You could buy one and do a brain transfer, or just use the thing
The faceplate comes off and has the board behind it (two little star keys above the button)
If you can solder then replacing the board shouldn't take too long.
If you can solder then replacing the board shouldn't take too long.
MaxAmps LiPo 800 3S 11.1v Heli Battery Pack
This should work. Just make sure to adjust your evolv settings. Hobbyking has a 950mah one but I think max amps is more trustworthy.
This should work. Just make sure to adjust your evolv settings. Hobbyking has a 950mah one but I think max amps is more trustworthy.
I contacted Evolv online and they gave me an RMA to return my LV Therion to a place in Ohio. THey stated they would repair for free and return shipping. They presently still have my BF Therion, and I'm just waiting for the return.
How long have you been waiting for it ? ask because i'm still waiting a reply to my e-mail to Evolv
I received a reply email from them ( EVOLV - Home) within 3 days with an RMA form. Long story short, They return my Therion and everything seems to be right again. They did not state what they repaired or replaced but if was for free except for shipping it them. Total time about 2 week turnaround.
well i heard back from them today, Can't help because it is past the 1 year warranty period .No indication about how to get it fixed on my dime either
doesn't give me too much faith in Evolv anymore
Hmm, sorry to hear about that. My BF Therion was an original when they first came out and well over a year. They did fix mine though with no charge.
i did ask how to get it fixed regardless.just might end up tackling it myself ?? we'll see
I just happen to be looking at chips when I saw this post check out Protovapor they sell the whole board for about $60 if you indeed need to replace it
I'll bump this as this thread is on the first page...
Does anyone know where to get the OEM bottles for this device? Every bottle i try is too short too wide, to skinny etc..they all work to some degree but they all end up leaking cause theyre too tight or floppin around inside.
Any reccomendations from someone who actually has this and has replaced the bottle?
Does anyone know where to get the OEM bottles for this device? Every bottle i try is too short too wide, to skinny etc..they all work to some degree but they all end up leaking cause theyre too tight or floppin around inside.
Any reccomendations from someone who actually has this and has replaced the bottle?
I sold my Halcyon a while back,so i can't remember exactly what all bottles i had tried in it,but i do remember i had swapped a silicone bottle into it.I believe it was an SJMY bottle from FT.i had to replace the tubing in the bottle so it was a little longer to keep the bottle sitting flush on the bottom of the mod,but it worked quite well.
As for the stock bottles,good luck finding those anywhere.They started disappearing shortly after the mod went out of production.FT had them for maybe 6 months or so after everyone else quit selling them,but even they don't have them anymore.
That is my 1 complaint about Lost vape stuff,is they all use proprietary bottles,and those bottles are very hard to find once they stop making that mod.I stocked up on Therion bottles as soon as i bought the mod,and i just recently got 2 Furyans,so will have to stock up soon on bottles for those as well before they disappear.
To anyone else in need I am trying these as advised on reddit. 8.5ml
Halcyon owners - check this out! : Squonk_Life
Halcyon owners - check this out! : Squonk_Life
I don't know if you have had success in finding a workable bottle. I just pulled out one of my brand new stashed Halcyons to use my Profile rda on.
I was surprised at how stiff the bottle was. I had forgotten. I guess I have become accustomed to silicone bottles through my evolving years of squonking. I put one of my Vandy Vape Pulse BF bottles on the Halcyon. So far, it fits, no leaks, and it is squishy. I am a happy vaper.
This is the bottle that I used as listed on Fasttech (mine are clear).
$3.72 Authentic Vandy Vape Squonk Bottle for Pulse BF Mod - 8ml / silicone at FastTech - Worldwide Free Shipping
I did not search elsewhere for availability. I wanted to show which of the Pulse bottles that I had on hand. There are different colors and multi-packs.
- Status
Similar threads
