The lock ring is the only thing that moves. Bottom, top, and middle all stuck in place. What do I do? I can't even change the battery it's all just stuck together. Only got this one like 2 days ago.
Hcigar Copper Nemesis wont unscrew anywhere....
- Thread starter Cary L Palmer
- Start date
- th_trl_thread_readers 0
- Status
I got one too. Copper is a really soft metal so when you tighten things down they tend to get stuck. You might wanna try and take the top airflow ring off and use a rag to put over the top so you don't damage the copper or just be really careful. Get a needle nose pliers and carefully remove the top cap. That should loosen everything else up. That's one of the things I hate about copper is it's always getting stuck (and a PITA to maintain). Hope that helps.
And put some lubricant before tightening again. I usually put some wd40 or similar products to keep the threads run smoothly and keep them from oxidating which is a pita with copper indeed.
Have you got rubber gloves that will help grip the mod? If not rubber bands work well too.
Yep, quit using mine because of this. One thing I found that helps, when unscrewing it try not to squeeze it hard. I often switch to my non-dominant hand to keep from doing this. Trying to muscle it off...........it only clamps down on itself. Now have a chowdered top cap from pliers.
Over tightened the Switch and Bound everything up.
1) Freeze Nemesis - 4 hrs. minimum
2) Have Rubber grip gloves or Rubber Lid disk ready.
3) Remove from Freezer and twist Switch like your life depends on it.
I have only had one of my 8 do this but it was a Bear to get loose.
1) Freeze Nemesis - 4 hrs. minimum
2) Have Rubber grip gloves or Rubber Lid disk ready.
3) Remove from Freezer and twist Switch like your life depends on it.
I have only had one of my 8 do this but it was a Bear to get loose.
Dang, sounds like it is going to be difficult to get off. Alright, I appreciate you guys!
I have it in the freezer. Unfortunately the battery is still in there (since I can't open it anywhere obviously) but the cold wont ruin it right? It's a sony! 
(
Hopefully I can get it open, I just bought it and I really love the nemesis. I've had 2 before and this has never happened. I don't want to take pliers to it.
(Hopefully I can get it open, I just bought it and I really love the nemesis. I've had 2 before and this has never happened. I don't want to take pliers to it.
Oh and just to be clear... the switch is the button on the bottom?
I usually don't ever even tighten or loosen it. Usually undo the middle of the mod to put a new battery in.
I usually don't ever even tighten or loosen it. Usually undo the middle of the mod to put a new battery in.
- Status
Similar threads
