Hcigar Nemesis Clone Stainless Steel Vaporizer Mechanical Mod. Any good?
- Thread starter Anthem13
- Start date
- th_trl_thread_readers 0
- Status
Lots of reviews on YouTube. I've got one by HCigar and it works great. The firing button is a little crunchy (not enough to warrant doing anything about it yet). Magnet upgrade kits are available on ebay should you wish to change it out.
Well you can expect the voltage drop that comes from SS, but other than that the HCigar clones are well made.
I put magnets & pins from FatDaddy vapes in mine, and since I use it with a Kayfun (not sub ohm) I also have a Kick-2 in mine.
I put magnets & pins from FatDaddy vapes in mine, and since I use it with a Kayfun (not sub ohm) I also have a Kick-2 in mine.
Hcigar has a reputation for making excellent clones , I have the Hcigar Kayfun 3.1 clone and it's perfect , go for it .
What are you looking for that the review/answers isn't providing?
I currently own a HCigar Nemesis SS, and the hit depends on your build on you atomizer. I'm not sure you will notice a big difference with aerotank on mech, maybe you can take a longer hit, but it might burn your coils.
The positive side, there are quite a few Nemesis users out there, and after market products such as magnet upgrades for the firing switch, hybrid adapter and an extended firing pins to help shorten the throw (pressing the firing button) also eliminate battery rattle. The HCigar Nemesis SS is one of my favorite mods and I do own Brass one, but haven't even open it yet. I own couple of brass mods such Chi You and King 2014, and patina kicks in quick....
I currently own a HCigar Nemesis SS, and the hit depends on your build on you atomizer. I'm not sure you will notice a big difference with aerotank on mech, maybe you can take a longer hit, but it might burn your coils.
The positive side, there are quite a few Nemesis users out there, and after market products such as magnet upgrades for the firing switch, hybrid adapter and an extended firing pins to help shorten the throw (pressing the firing button) also eliminate battery rattle. The HCigar Nemesis SS is one of my favorite mods and I do own Brass one, but haven't even open it yet. I own couple of brass mods such Chi You and King 2014, and patina kicks in quick....
The spring came out of mine...the button was really really crunchy. I had to order magnets so my Nemesis is on the shelf until they get here.
Other than that, performance was just fine.
Other than that, performance was just fine.
I have 3 HCigar Nemesis clones. Mine are a copper, a stainless, a brass and all work perfectly. As for switches I changed all of mine to the magnets and adjustment pin sets offered by FatDaddyVapes which work as the good as the real Nemesis. I didn't use the fat top pin as I either use a kick 2 or take off the ring for it.
I found the stainless one is pretty much seamless when screwed together and really looks great with many of the stainless steal RDA in 22mm I use. Many including the Kayfun tend to match the finish on mine almost perfectly.
I found the stainless one is pretty much seamless when screwed together and really looks great with many of the stainless steal RDA in 22mm I use. Many including the Kayfun tend to match the finish on mine almost perfectly.
I have one also and the quality is excellent. My button was also crunchy but like the others did, put it magnets from ffat daddy vapers and it's much smoother. Also have one from Fastech. Night and day between the two. I can't comment about the authentic cause I've never held one.
I have both the Hcigar Nemesis Stainless Steel & Brass and the Hcigar copper Nemesis clones. Both are good. I like the copper Nemesis with or without the magnet upgrade for the switch. Hcigar makes a quality product.
I reviewed and compared both on my Youtube channel: Job131 Vapes
Take a look.
Hope this helps.
I reviewed and compared both on my Youtube channel: Job131 Vapes
Take a look.
Hope this helps.
I'm waiting on my SS one to get here tomorrow. Got the magnets for a few extra bucks, and picked up a Tobh Atty v2 clone. My first RDA and Mech Mod. Looking forward to to throwing some clouds around. Hope it works out for you if you get it!
I just got one too. It has no instructions. I also bougt the Hcigar Patriot clone to go with it. Where do I put the magnets I bought? Is there an instruction manual anywhere online? I haven't had time to visit the hcigar site if they even have one or search for instructions.
The magnets replace the springs. Just install them with similar poles facing each other and reassemble the switch.
Maurice
Maurice
My stainless steel Nemesis clone is from Fasttech, and not from HCigar, I think, but based on my experience and what I've read, there doesn't seem to be a whole lot of difference. Perhaps HCigar has a lower incidence of issues? Mine looks and feels great, aside from the initially crunchy button which is now much better. Mine thankfully came with magnets, not springs, which I did not expect and for am thankful for. One thing of note though: I don't feel it's worth getting into mech mods if you don't use RDAs. I do not yet rebuild, and my fake Nemmy has pretty much been designated as a back up vape, as with a regular Aspire or Kangertech tank on it, you're not getting anything more out of it; better vape on an electronic device.
I can say the ss nemesis from fasttech is great for the price vapes like a champ with a rda and a good battery and build in there only cons I found with it are the bottom contact pin comes loose every once in a while so you have to unscrew it and retighten it which takes 5 sec and the locking piece is kinda stiff at first but once you play with it a little and break it in it works great
- Status
Similar threads
- Locked
