Hello! A question about eMode / iTaste VTR

[DejayRezme]

Hello,

first off thanks for all the info about vaping, it helped me a lot to make a quick and painless transition from smoking more than a pack of cigarettes to vaping.

I have a question about the iTaste VTR and if the eMode Atomizer (for 25€) would fit into it, and if it would be a good choice.

After my first eCom I now ordered the iTaste VTR for my desktop, mostly because it looks awesome and is rather low, has 15 watts and a dial. I think this will be rather popular.
But now I'm looking for a good clearomizer. Since I like the eCom (cool and dense vapor, no leaking) I wonder if the eMode fits into the VTR? It uses the same clearomizer head and also has air control. Without buying the set it's not more expensive than the Kangar Aerotank. Is the air control worth it? Anyone got good experiences with either one? Is the Kanga Aerotank better?

I'd be thankful for any advice.

484102-innokin-itaste-vtr-compatibility-big-list-atomizers-fit-without-adapter-5

 

[djsvapour]

I thought Joyetech were moving into new territory designing products that would NOT fit other product makers hardware.

Because of this, I am not buying Joyetech and not recommending Joyetech.

However, I thought the eMode atomizer, once put together, was basically a 510 thread "topper" (tank)....

BUT, you want to know about the physical dimensions of the atomizer to know if it will fit on/in the VTR... In this case, you are in trouble, as 99% of VTR users won't be buying Joyetech products. I wish I could help more...

 

[calibusa]

I dremeled my ring off of my vtr then polished. I did this because I wanted to use my kayfun. Now my vtr will accept any 22 mm rba.

 

[DejayRezme]

BUT, you want to know about the physical dimensions of the atomizer to know if it will fit on/in the VTR... In this case, you are in trouble, as 99% of VTR users won't be buying Joyetech products. I wish I could help more...

Don't they deserve some slack for creating the whole standard? They only release one hybrid and the eMode is standard. Why is it so disregarded?

I guess the eMode should fit but has a few disadvantages, expensive heads, rather small tank... or is it because the taste / vape is worse than other tanks / RBAs?

But hey they keep trying to innovate, I really like the idea of the adjustable air flow and air intake at the top so nothing can "leak", and the C2 heads won't burn when they have no more liquid.

I dremeled my ring off of my vtr then polished. I did this because I wanted to use my kayfun. Now my vtr will accept any 22 mm rba.

Oh nice, thanks for the info. Is that difficult to do? You only need a normal power drill and a dremel for this right? Did you screw the top piece off first? How long does the polishing take?

 

[calibusa]

I put the I wrapped the vtr in a facecloth and placed it in a small vise. Made sure I didn't tighten over the screen. Then just cut each side of the ring separately. After that I took 500 grit then 1000. Lastly used cotton wheel with some 2000 grit 3m compound to polish.

Sent from my LG-MS870 using Tapatalk

 

[calibusa]

It took about 30 to 45 minutes.

Sent from my LG-MS870 using Tapatalk

 

[DejayRezme]

Thanks for the info!

 

[calibusa]

You're welcome let me know how it goes.

Sent from my LG-MS870 using Tapatalk

 

[DejayRezme]

I'm not sure if I dare undertake it I'm not really good with tools.
I've ordered a kanger aerotank and a nautilus to see how I like each and decide later.
But you could make a little thread with pictures on how you modded your mod, I'm sure many
would like to see it!

 

[calibusa]

Yes that does sound like a great idea. Matter of fact I did get the Nautilus to fit. And let me tell you it looks as good as the kayfun.

Sent from my LG-MS870 using Tapatalk

 

[calibusa]

Don't feel bad though. I myself am not an expert with tools but that's usually when I take my time in doing things.

Sent from my LG-MS870 using Tapatalk

 

[calibusa]

I'll post my pictures when I get a chance.

Sent from my LG-MS870 using Tapatalk

 

[DejayRezme]

Good to hear that the nautilus will fit without the ring because it's my favorite tank atm. I've read somewhere that it wouldn't because of some ridge or something even if you remove the ring.

 

[calibusa]

I've sanded down the ring located at the base of the tank to make it fit. Fortunately it was only about a mil to maybe 2 mils that needed to be removed.

Sent from my LG-MS870 using Tapatalk

 

[calibusa]

Sent from my LG-MS870 using Tapatalk

 

[calibusa]

Sent from my LG-MS870 using Tapatalk

 

[calibusa]

Sent from my LG-MS870 using Tapatalk

 

[DejayRezme]

Very nice!

Too bad you also need to mod the Nautilus.
Do you even use it instead of the a Kayfun? I thought the RBA are better?

 

[calibusa]

Yes rba better but it's nice to have a large tank. Plus the Nautilus can be rebuilt it just takes some patience

Sent from my LG-MS870 using Tapatalk