Want to build a puck,but need to know how to scrap a 510 batt for carto connector..Thanks
Help a guy out
- Thread starter steven1356
- Start date
- th_trl_thread_readers 0
-
- Tags
- madvapes
- Status
You'd be better served just buying a 510 connector at madvapes for a buck twenty nine or at kens box mods for a buck seventy nine.
That said: A pair of pliers, a vice, and a nice soft piece of cloth will be necessary. Put the battery in the vice, put the cloth around the 510 connector, and grip the cloth with the pliers. Take it easy and don't smash the pliers down too hard - twist and wiggle it back and forth until the connector comes out. Don't yank it because there's wire soldered to it. Once you've pried it loose, heat of the solder for the wires with your soldering iron and remove them.
That said: A pair of pliers, a vice, and a nice soft piece of cloth will be necessary. Put the battery in the vice, put the cloth around the 510 connector, and grip the cloth with the pliers. Take it easy and don't smash the pliers down too hard - twist and wiggle it back and forth until the connector comes out. Don't yank it because there's wire soldered to it. Once you've pried it loose, heat of the solder for the wires with your soldering iron and remove them.
- Status
