HELP!!! (Battery question with regards to mech mods.)

[kjernio]

Can I use an LG HG2 with my single 18650 mech mod, around 0.3 ohms?? or will it suck due to not enough ampage???
Thx yall.

 

[sonicbomb]

0.3 ohms is 14 amps and 58 watts.The CDR of the LG is 20 amps so you are good.
I wouldn't go much lower than that though.
You can calculate this using steam-engine

 

[Two_Bears]

0.3 ohms is 14 amps and 58 watts.The CDR of the LG is 20 amps so you are good.
I wouldn't go much lower than that though.
You can calculate this using steam-engine

I use tge same batteries. I wouldnt go lower than .25 that would pull 18 amps if memory serves. Saw the Math in another thread

 

[r77r7r]

And that's if it's not a clone battery. Buy it at a reputable store?

 

[sonicbomb]

Indeed, but my answer was gauged according to the substance of the question.
The maths couldn't be easier, volts divided by resistance equals amp draw. Or use steam engine.

 

[Two_Bears]

And that's if it's not a clone battery. Buy it at a reputable store?

Could not agree more.

I buy and use clone attys but batteries and mods I want authentic 100%

The only authentic Atty worth a darn imho is the Darang RDA. All other authentic attys have let me down BIG TIME!

 

[BrotherBob]

Can I use an LG HG2 with my single 18650 mech mod, around 0.3 ohms?? or will it suck due to not enough ampage???
Thx yall.

Welcome and glad you joined.
Might like to read:
18650 Battery Buying Guide for Vapor Users – Wake and Vape Blog
(9) Battery Basics for Mods; the Ultimate Battery Guide | E-Cigarette Forum
(12) Deeper Understanding of Mod Batteries - Part I | E-Cigarette Forum
Battery Safety: Will You Marry Me? - Mt Baker Vapor

 

[GBalkam]

LG 18650 HD2: 25 A – 2,000 mAh
LG HB6 18650: 30 A – 1,500 mAh

Both good for mech mods. Lots of amps to play with. Mech mods like the amps, Regulated like the Mah.
So Mechs like the power
Regulated like the run time.
and only buy Sony, LG, or Samsung. God knows what crap you will get when you buy a rewrap (rebranded) battery.
With a mech, don't worry about Mah, since you will probably be recharging them around 3.8v anyway, well above the 3.4v you would use for regulated recharge limit.