Those analogs are looking good right about now, so I need your help! My ecig gets really hot and it feels like I am not getting enough vapor from it, like it is resistant to sucking through it maybe? I am using a 510-t joye atty and 510 joye batteries. I just recently switched over to juice that is almost all VG because of PG irritation. Do I need to directly moisten the wick in the atty with a couple drops of juice every once in a while? Is the VG too thick? How can I make it thinner? Do I need to clean the wick? Thanks guys for your help.
Help! Ecig very hot, vapor not very good...
- Thread starter Juliebabala
- Start date
- th_trl_thread_readers 0
- Status
Hi! I think that the problem of an insufficient quantity supplied to the atomizer fluid. Please look at instructional video for filling the tank.
Yes although I haven't used attys in a long time overheating is usually a sign of lack of juice. Prolly because of the high VG content. To thin try using a small quantity of PGA or distilled water to thin the juice.
Good Luck.
Good Luck.
Thank you guys. I am actually doing the fluid right, AND I tried PG liquid quite a bit yesterday and I still had the problem. I got home from a trip this morning and switched from the tank atty to a regular atty and cart and my god what a difference! It must have been very gradual over time the tank not letting me get any vapor otherwise I would have noticed right away when I changed over to the tank! I am considering putting the tank atty in boiling wAter to clean it, but is there a better way to clean it? I miss my tanks!
I just found this post: http://www.e-cigarette-forum.com/fo...w-maintain-your-joye-t-atomizer-properly.html
Vicky from cigno tells you how to clean the joye t atomizer, and it was so helpful!! I nearly f-ed the wick up, but I undid the metal mesh and tried to dred the wick with a drop of distilled water and my thumb and index and then redid the mess. First time it was too tight and small and slid in and out of the wick holder too easily. I redid it a little larger and looser and it went in and stayed better. However, trying to grab it from the other end is soo hard- you can only seen to grab the fibers, and those will slip right out of the metal mesh! Yeesh! When I finishe though, I got a draw like it was day one when my draw before had been SOOO hard. Thanks all!
Vicky from cigno tells you how to clean the joye t atomizer, and it was so helpful!! I nearly f-ed the wick up, but I undid the metal mesh and tried to dred the wick with a drop of distilled water and my thumb and index and then redid the mess. First time it was too tight and small and slid in and out of the wick holder too easily. I redid it a little larger and looser and it went in and stayed better. However, trying to grab it from the other end is soo hard- you can only seen to grab the fibers, and those will slip right out of the metal mesh! Yeesh! When I finishe though, I got a draw like it was day one when my draw before had been SOOO hard. Thanks all!
- Status
Similar threads
