Help me find the problem

[roguly]

I have an atmizoo dingo and an igo-w (1/8th drilled ariholes). It seems my vapor production is not on par with builds with the same resistance. Although i get plenty of vapor and technically its working great. Sometimes i just want to wrap a LR coil and just relax and blow fat clouds. Im thinking its either my battery or my mod. My battery might be on its last legs but my mod might also be losing voltage (due to cleanliness, but TBH theres no obvious grime or buildup, and i clean it about once every 2 weeks). I had a multimeter but the fuse broke and now i lost it i guess /: what do you guys think? Basically theres a minute difference in my .5 dual coils and .8-1.0 single coil builds as far as vapor density or milkiness
Dingo
Aw imr 18490 10c
igo w

 

[Trenton J. Elkin]

Are you batteries rated for 30 amp continous discharge? If the battery is fully charged my only guesses would be that your air holes are not lined up with your coils. I have never used that mod but I get a pretty big voltage drop through my Magneto and IGO-W. But a 0.5 ohm dual should be hitting much harder than an 0.8-1.0 single coil forsure.

 

[roguly]

Are you batteries rated for 30 amp continous discharge? If the battery is fully charged my only guesses would be that your air holes are not lined up with your coils. I have never used that mod but I get a pretty big voltage drop through my Magneto and IGO-W. But a 0.5 ohm dual should be hitting much harder than an 0.8-1.0 single coil forsure.

nope stated my battery type, its an aw 18490 8c which i believe is a little under 9 amps continuous. air holes are always lined up...the hit is fine but like i said theres just not that much vapor compared to similar builds, still plenty of vapor, just not as much as their should be

 

[Trenton J. Elkin]

With a 0.5ohm coil I would definetly pick up some MNKE 1500mah, or Sony Vtc4s. That may fix your problem. Those batteries should only be going as low as 0.7-0.8




#VapingSince-July5th2013

 

[Bunnykiller]

what kind of juice are you using?? 100%VG gives a more dense vape as compared to a hi PG blend