Help me with my ohm reader!

[DesmondTheMoonbear]

My buddy has an ohm reader that I want to use, but my Igo won't make a connection to it and it isn't user serviceable, I.E. The pin isn't adjustable, and there's no way to open the casing.
My question is, is there anything I can stick between the Igo and meter to make a connection that isn't going to affect the reading?
Thanks much,
Desmond

Sent from my SCH-I535 using Tapatalk

 

[DoMortas]

Get a 510 - ego/510 adapter and use that. It works for mine

 

[Ryan Kelly]

had the same problem with my first igo but it wouldn't make connection with my stingray clone. i haven't tried this but a lot of people told me to get circuit board spacers from madvapes. they are ridiculously cheap but shipping starts at 10 bucks so if you have anything else on your wish list now is the time to throw it in your cart hahaha.
Circuit Board Spacer

 

[DesmondTheMoonbear]

Get a 510 - ego/510 adapter and use that. It works for mine

Let me rephrase.
Is there anything around the house I can use? Lol
To say that I'm broke right now would be a gross understatement.

Sent from my SCH-I535 using Tapatalk

 

[pmcode]

Look at the bottom of your IGO center pin. Is it surrounded by a white or clear insulator? If so, you can stick it into a board with a hole drilled slightly larger and deeper than the entire 510 connector, and tap on the center pin from the top. It should force the center pin down slightly, letting it make contact. That is what I had to do with one of my first drippers.

 

[bluecat]

I second the banging of the positive post. It is what I did to make it work on a SVD.