Help please

[MeredithJc]

I have the smok alien 220 and I bought a new tank. The new tank is the cloud beast tfv8. I have the q4 coil in it. When I got it all ready to vape it's telling me ohms too low. How do I fix this? I use wattage mode. It recommends with the q4 to set at 90-150W. Please help....I'm anxious to try this bad boy out! Thanks in advance for your help!

 

[Eskie]

Have you tried replacing the coil? It might just be a bad Q4 coil that's the cause. It can happen, and is the easiest thing to check.

 

[MeredithJc]

Have you tried replacing the coil? It might just be a bad Q4 coil that's the cause. It can happen, and is the easiest thing to check.

Yes I have tried 4 different coils unfortunately. I'm starting to think the chip is bad in the mod because it's now telling me that one battery is fully charged and the other battery isn't. It's fluxuating battery A up and down. It's messed up looking!

 

[madstabber]

Check your batteries and then your connections on the tank and the mod. Use common sense to try to find the problem and if all else fails return to sender

 

[MeredithJc]

Really

Check your batteries and then your connections on the tank and the mod. Use common sense to try to find the problem and if all else fails return to sender[/QUO

 

[MeredithJc]

Check your batteries and then your connections on the tank and the mod. Use common sense to try to find the problem and if all else fails return to sender

Really?!! I've done those things but thought maybe I was missing something or maybe someone else had a similar issue that found a resolution. Sorry I have offended you by asking for some help or input on a resolution. I won't ask for anything again! I thought this was a place you could get help on issues or input or ideas on things and that it was a friendly place! Guess I was wrong!

 

[r77r7r]

Really?!! I've done those things but thought maybe I was missing something or maybe someone else had a similar issue that found a resolution. Sorry I have offended you by asking for some help or input on a resolution. I won't ask for anything again! I thought this was a place you could get help on issues or input or ideas on things and that it was a friendly place! Guess I was wrong!

I think he meant to just stick with the basics. Disassembly, clean, reassemble.

 

[MeredithJc]

I think he meant to just stick with the basics. Disassembly, clean, reassemble.

I apologize then if I took it wrong. I'm truly sorry! My bad for reading it out of context.

 

[r77r7r]

I apologize then if I took it wrong. I'm truly sorry! My bad for reading it out of context.

Sometimes things don't come across well in text enjoy the forum and your day!

 

[madstabber]

I apologize then if I took it wrong. I'm truly sorry! My bad for reading it out of context.

Yea sorry I didn't mean to offend you but after re-reading it I can see how it could. This place is definitely a place for questions and answers with respect. There are some on here that can be condescending but they are few and far between. No worries and I apologize for my part, feel free to ask your dumb questions. Just kidding there is no dumb questions just....well you know the rest good luck and I hope you get your issues resolved, no hard feelings

 

[madstabber]

Yea the "use common sense" line really comes off bad r77r7r said it better, what I should have said was stick to the basics.

 

[2GLR]

Could be a short in your 510 connection has fried your board.

 

[Oomee]

Times like this multimeter can be very handy, even a cheapo UniT.
Only trouble with that is you have to know or learn how to use one, but that isn't too complicated.
If you do get one, a top tip is to remove all the fuses in it, that way should you accidentally connect it to supply when in "Amps" mode there will be no tears.

 

[D4rk50ul]

Just had this issue with the h-priv and the big baby beast. Thread the atty on then loosen it about half a turn. Fire it and it should say new coil found. If not loosen it slightly more. Once it recognizes the atty you can tighten it up and vape away. Make sure the coil is primed before you press the fire button though.