Help! Smok xpro m80 plus.

[killuh208]

I have the smok xpro 80 plus and I have an apsire triton tank with the nickel coils on them. How do I set the resistance.. Once I begin using the coil the resistance jumps. I went through the manual and couldn't find it. Does this device have the lock feature for temp control? If so how?!

 

[tony7432]

It does not have a feature to set or lock in your resistence, for temp control click the fire button three times and then it shows the word wattage click the fire button again and it will show the word temp and leave it for about two seconds and it will stay in temp mode. Then click the fire button three times again and then scroll thru until you see the thermometer i believe its #4 once you see it wait a few seconds and then it will show you the temp adjust up or down with the two buttons you use to raise and lower your wattage once you set the number to the temp you want wait a few seconds and it will set it to that temp and thats it

 

[Hans Wermhat]

I've seen several posts about that mod having problems in TC mode. Not sure if anybody found a solution. There is a model specific device forum. Check over there and see what you can find.
Temperature Control | E-Cigarette Forum

 

[dcfluegel]

the smok m80 is really not recommended for temp control - sorry - there are a lot of reviews/ posts about it - great little mod for wattage mode, but the TC on the m80 is doodoo, even with the firmware upgrades... would NOT recommend that device for temp control at all (and i have one, as well as the aspire triton tank)