HELP- Want the best Pre-Made Mesh Wick for Pegasus A7 Style RBA

[niczgreat]

I just bought a pegasus A7 style rba Atomizer from DiscountVapers.
I have a Bogger Box VV Bottom Feeder so this is one of the few choices that I have.

I don't want to get involved with blow torching, and my goal is to vape on pure metal or possibly ceramic.

Can't find ceramic wicks so metal mesh is my choice.

What I need to know is which of these three, or other option is the best to set up with my new pegasus A7 Style RBA.
I bought a few of the Good Prophets but if there is a better choice, can buy something in addition.

So I found

Option 1 Vapor Kings Middle Price $1.95

This is a pre-rolled and oxidized stainless steel wick for use in many rebuildable atomizer tank systems. 400 mesh size Approximately 1 1/2" to 1 3/4" in length and approximately 7/8" wide unrolled.

Option 2 Lite Cig USA Cheapest $1.25
but they don't tell you the Mesh Size
Genesis Stainless Steel Mesh Wick
Prerolled, and oxidized stainless steel wick for the Genesis rebuildable atomizer.
You are purchasing 1 x "sealed" stainless steel mesh wick.

Option 3. Good Prophets
Stainless Steel Mesh for DIY atomizers (Pre-oxidized)
This stainless steel mesh is used in DIY atomizers.
400 mesh size.
Approximate size is 1 inch x 2 inches if unrolled, 1/8inch by 2 inch rolled.
However, this is pre-oxidized and rolled up ready to use in your DID style rebuildable atomizer.
Price is for one piece.

 

[pdib]

I've used the Good Prophets, its good. What do you mean "can't find ceramic"? XC-116 Ceramic Wick - 12" Heat Cleaned or http://bigtexvapor.com/search?q=xc-116&submit=

 

[niczgreat]

I've used the Good Prophets, its good. What do you mean "can't find ceramic"? XC-116 Ceramic Wick - 12" Heat Cleaned or xc-116 – Big Tex Vapor

They are out of stock
Is the good prophets bendable?

 

[niczgreat]

Duplicate Post

 

[Absintheur]

If you don't want to torch you can use this method on roll your own wicks...you don't have to use a torch but do use at least a lighter to burn off any possible contaminates. Start at about 13 min mark...

A PBusardo Review - Smoktech RSST Genesis Atomizer - YouTube

 

[Ctor]

I just bought a Pegasus A7 style RBA Atomizer from DiscountVapers.
I have a Bogger Box VV Bottom Feeder so this is one of the few choices that I have.

I don't want to get involved with blow torching, and my goal is to vape on pure metal or possibly ceramic.

Can't find ceramic wicks so metal mesh is my choice.

What I need to know is which of these three, or other option is the best to set up with my new Pegasus A7 Style RBA.
I bought a few of the Good Prophets but if there is a better choice, can buy something in addition.

So I found

Option 1 Vapor Kings Middle Price $1.95

This is a pre-rolled and oxidized stainless steel wick for use in many rebuildable atomizer tank systems. 400 mesh size Approximately 1 1/2" to 1 3/4" in length and approximately 7/8" wide unrolled.

Option 2 Lite Cig USA Cheapest $1.25
but they don't tell you the Mesh Size
Genesis Stainless Steel Mesh Wick
Prerolled, and oxidized stainless steel wick for the Genesis rebuildable atomizer.
You are purchasing 1 x "sealed" stainless steel mesh wick.

Option 3. Good Prophets
Stainless Steel Mesh for DIY atomizers (Pre-oxidized)
This stainless steel mesh is used in DIY atomizers.
400 mesh size.
Approximate size is 1 inch x 2 inches if unrolled, 1/8inch by 2 inch rolled.
However, this is pre-oxidized and rolled up ready to use in your DID style rebuildable atomizer.
Price is for one piece.

Do you have a gas stove? I use either a stove or a butane pastry torch. It's alot simpler than I thought it would be when I first started.

 

[pdib]

most folks cut and roll their mesh on the bias (diagonal) for a flexible/bendable wick. So, not really. It isn't necessary to oxidize for dripper setup (nor a Genny, really). It takes a bit more "finesse" but not much.

 

[chadsmo]

Just cut and roll your own wicks. You can pick up an 11x17 inch sheet of mesh for under 20$ shipped and get a ton of wicks out of it.

 

[niczgreat]

Looks like I found my solution.
I have Xc-116 Ceramic Wick coming in next week.