Help with Cisco LR306 Atomizer + Drip Tip

[Keithhe]

A bit confused. I asked for recommendations on a drip "device" to allow me to more easily test juices I'm still trialing and several suggested the Cisco LR306 and to use the XL Delrin Drip tip.

OK, I ordered those and received today and at a total loss as to how these work?? Not at all what I was expecting but the Delrin tips do not fit over the atty part, so why do I have those? No idea how to use these, and Google only found a review, but no how to on these.

Did I screw up and get the wrong thing??

Thanks,

 

[The Ocelot]

I use a Cannon with my LR306s, which fit over the outside.

ETA: Ignore my last post if you read it, I was mistaken. All of the tips I have for my LR306s fit on the outside. It sounds like you may have gotten a 510 tip.

This is what a Cannon looks like: http://www.youtube.com/watch?v=Wvl-qIx556s

 

[Keithhe]

Yeah, not really sure?? I ordered from Avid Vapor where they had a combination special for the atty and a radio button selection below the atty for the "tip" you wanted, so seems that they should have matched?? No idea, but there is no way this tip will go over the atty. It's just too small in diameter.

 

[darkhood]

The one on there should pull off so you just have the atty - a little gold or silver piece - little cup w/ a coil on top. Then you just put the extended tip on there. If it doesn't fit they messed up.

 

[Keithhe]

Cool, yeah that works. So I just drip into the tip and vape? Sorry, have really only used tanks and never dripped, so I know these sound like stupid questions.

 

[darkhood]

Yep, just drop 2 or 3 drops right into the hole in the tip and you're good to go. Actually I'd recommend putting 6 drops in if it's brand new, let it sit for a min or two then drip in what you want to smoke (vape whatever). In my experience 1 drop = 2 hits.

 

[darkhood]

If you flood it just blow in through the bottom (threaded part) into a paper towel and wipe out the tip.

 

[darkhood]

If it's bridged btw you might wanna prime it better idk - I only have experience w/ bridgeless 306's which only require a few extra drops at first to prime.

 

[Keithhe]

Thanks Dark Hood. I did manage to flood it and did blow it out. What is bridged?

I'm worried this is going to be a messy way to vape. I can't believe people do this exclusively.

 

[darkhood]

No problem. The bridge is a little mesh thing you'd see going across the top - if all you see is a coil then it's bridgeless, if you see a silver mesh piece in an arc then it's bridged and designed to be used with some sort of tank. Bridgeless is made just for dripping.

 

[darkhood]

It can be messy lol, ppl who do it a lot tend to get drip shields. It gets easier and less messy as you start to learn how many drops to use/when to refill. With a bridgeless you can tell cuz you'll get a sizzle when it's running low and needs more juice

 

[Keithhe]

OK, then that means mine is bridged. Crap, so I did in fack get the wrong thing. How would you even use this with a tank?

 

[darkhood]

it probably came with a little "tank", the little mouthpiece thing you can fill with like 8 drops is all I meant, not an actual tank. you can use that to drip, it doesn't matter, its just that bridgeless is easier in my experience and it just removes one more thing that can interfere with flavor. cisco spec atties are great though and just cuz it's bridged doesn't mean it's the wrong thing or you can't use it. It will get a lil gunked up though whereas bridgeless wont.

 

[darkhood]

these are best drippers I've found btw and they're rly cheap - Vape - SmartVapes 306 1.8ohm E cig Dripping Atomizer. They're what I use to test flavors. One should last you at least a month, probably much longer.

 

[darkhood]

I've been using the same one since I bought it (even though I bought a whole bunch after I got all excited when it lasted me through a week of pretty heavy usage - I'm a confessed atty killer and've destroyed at least a dozen in the past few months lol).

 

[Keithhe]

these are best drippers I've found btw and they're rly cheap - Vape - SmartVapes 306 1.8ohm E cig Dripping Atomizer. They're what I use to test flavors. One should last you at least a month, probably much longer.

Great. I'll order some of thos and see how they work. Thanks Dark !!

 

[darkhood]

You got it