Help with Protank 2, Please

[debkerri]

I just got it in the mail yesterday. It's an authentic Kanger, came in the box with ring and 2 coils. I loaded it with the 2.2 ohm coil and juice, it worked great. I just refilled it and it's leaking through the coil. I can't even vape. All it does is gurgle like an overfilled CE4. Thankfully my battery is sealed! How do you get them to quit leaking and why did it work fine for the first tankful and then start?

 

[Princess Fluff]

First off, open it up and blow it out to clear the flooding. Make sure the coil is still screwed in tightly. My experience with this tank is that occasionally the coils can come slightly unscrewed and cause leaking. After that I would want to know what wattage or voltage you are using with the 2.2 ohm coil. Kanger can be fussy, but it's worth figuring it out.

 

[debkerri]

I had already blown it out and made sure it's tight. I have a small pair of pliers I have to use to tighten the due to my MS. I'm vaping at 3.6v, Kanger says 3.4 - 3.7, so that's what I went with.

 

[Ian Reese McDonald]

i had this problem too. one thing i found out very fast is NEVER blow through the mouthpiece. also when i removed the top flavor wick it stopped the leaking. not sure why..

 

[debkerri]

I took the top wick out and it made it worse, but I vape a thin liquid, 80/20 or 70/30. I think the core must have just been bad, the new one doesn't leak. I don't like V2 as well as I like V1. I can't seem to find a sweet spot on the V2. It's too airy or it leaks....

 

[dimo]

If removing a flavor wick made it worse, try to add an extra one.

 

[v1k1ng1001]

If you vape thin liquid then you don't need to remove wicks.

Do you have a variable voltage/wattage mod or battery? It helps a lot.

 

[dice57]

I prefer the PT II over the original. I've found that if you don't allow a new coil head to soak long enough it will flood on both models. Yeah it it usually acts up on the second fill. I run the 1.8 ohm coils anywhere between 3.8 v - 5 volts, depending on the juice I use. Haven't had any problems as long as I allow enough time for the wicks to saturate the juice before the first firing.