HH357...finally trying it

[karmakatie]

I got the hh357 in today and have been vaping it all afternoon. My verdict so far is.....THIS THING ROCKS!! I was expecting a pretty big learning curve and it is not there for me! It must play well with my vaping style. The version I opted for is the long barrel 1.5ohm, the flavor and vapor is amazing. All I did was put the 6 drops in the Hannah advises, put it on the Reo grand and top it off when needed.....no problems what so ever. Now to see how long it will last me...

 

[washvap]

Congrats on finding an atty that works for you. A lot of REOnauts swear by this atty and it's good that your liking it so far. Interested to hear how long it lasts you.

 

[TheSneakerHoarder]

I_swear_by_them...had_4_going_all_at_once.

They_had_plenty_of_life_left...BUT,_after_cleaning_them,_I_forgot_to_re-prime.

They_are_all_tasting_like_crap.

BE_SURE_TO_RE-PRIME_IMMEDIATLY_AFTER_CLEANING!!!!!!!!!

 

[karmakatie]

I_swear_by_them...had_4_going_all_at_once.

They_had_plenty_of_life_left...BUT,_after_cleaning_them,_I_forgot_to_re-prime.

They_are_all_tasting_like_crap.

BE_SURE_TO_RE-PRIME_IMMEDIATLY_AFTER_CLEANING!!!!!!!!!

I usually reprime my other atties as I found they perform better after cleaning, so this will be no different for me.

 

[SammyT]

I love the hh357. They just work so well. If you like high voltage try a 3 ohm @ 6v. It rocks even more! I want to try 2 3 ohm coils on my new rebuildable


-Sam

 

[unsure]

My long barrel HH .357 just died after a week. After 5 HHs Im sure they are not ment to be for me. Regular Cisco LRs last & last & ROCK.

 

[Mudflap]

Of my three, one died and the other two have crept down in resistance to the point where they're too hot for me. I'm gonna try 'em again on a VV Reo Grand turned all the way down and see if I can't get some more use out of them. If not, no big deal since they lasted me several months.

Till then, I'll day-dream about a rebuildable for bottom feeders.

 

[madsen6466]

Of my three, one died and the other two have crept down in resistance to the point where they're too hot for me. I'm gonna try 'em again on a VV Reo Grand turned all the way down and see if I can't get some more use out of them. If not, no big deal since they lasted me several months.

Till then, I'll day-dream about a rebuildable for bottom feeders.

I think Rob recently announced over in Reo land that he's working on such a thing

 

[jgrubb]

I have been using one without much rotation for over 4 months. Follow Hannah's instructions on how to clean and it will be a fantastic performer. Vapor production for me is just as good as it was the first week I got it

Sent from my HTC Hero S using Tapatalk

 

[Mudflap]

I think Rob recently announced over in Reo land that he's working on such a thing

Yes. Yes, he did. Exciting stuff!

 

[Horseman9]

I also reprime all my atties after cleaning, I think that helps with both initial taste & longevity. I've only had my HH357's for 10 days, so far very impressed

 

[unsure]

I also reprime all my atties after cleaning, I think that helps with both initial taste & longevity. I've only had my HH357's for 10 days, so far very impressed

I always followed the instructions with each new HH but once that was done I treated them like I do all my other LR Cisco attys. That last one was never cleaned (didn't feel it needed it) and kept it wet at all times so its obvious there is something else that IM doing or not doing to kill them thats NOT killing Cisco regular atty.

 

[Big Hitter]

Congrats, we all know I'm a big fan of them.

But I have to admit for the price difference the Cisco Spec Bridgless 1.5Ω attys are the one for me.
They work 95% as well and I get more than 2 for the price of 1 HH-357.

But I will probably always have a few around still the same. I haven't killed one yet sot thats good.

 

[unsure]

Congrats, we all know I'm a big fan of them.

But I have to admit for the price difference the Cisco Spec Bridgless 1.5Ω attys are the one for me.
They work 95% as well and I get more than 2 for the price of 1 HH-357.

But I will probably always have a few around still the same. I haven't killed one yet sot thats good.

+1 for the Cisco Spec Bridgless 1.5Ω attys

 

[Horseman9]

Heh, maybe its just the FFoF unsure.

 

[jgrubb]

I would love to hear more about these rebuildable attys Robert is playing around with. All this waiting is killing me .. waiting for vv reo has been hard, but now the talk of a rebuildable is incredible. Must have patience.

Sent from my HTC Hero S using Tapatalk

 

[unsure]

Heh, maybe its just the FFoF unsure.

 

[karmakatie]

I would love to hear more about these rebuildable attys Robert is playing around with. All this waiting is killing me .. waiting for vv reo has been hard, but now the talk of a rebuildable is incredible. Must have patience.

Sent from my HTC Hero S using Tapatalk

I hear ya! I was lucky enough to nab a Kick to make due till I get a real VV grand.....I almost punked out and got one of the Mini Provaris, but I really don't use the one I got that much, I just really like the bottom feeders. Hubby did start vaping a few days ago and he is using the Provari and he nabbed my Reo mini, so guess I will have to get another mini as well. He does keep stealing hits of the Grand with the HH357 and kicked....says he really likes it. I wish I could have strated vaping with all the choices he has available to him, would have been so much easier!

 

[jun0felix]

i tried a hh357 at 1.5 ohm and wasn't too much impressed... maybe i wanna try a higher resistance some day..

and i found a very nice 2.5 Ω hybrid atty by vapage for 5v, works very good for me and it costs half the price of the hh357...

is this hybrid stuff coming out (up?) now everywhere? dunno, still stick to cartos, hehe ...

 

[jgrubb]

i tried a hh357 at 1.5 ohm and wasn't too much impressed... maybe i wanna try a higher resistance some day..

and i found a very nice 2.5 Ω hybrid atty by vapage for 5v, works very good for me and it costs half the price of the hh357...

is this hybrid stuff coming out (up?) now everywhere? dunno, still stick to cartos, hehe ...

Wattage will still be pretty close to the same with 2.5 ohms at 5v if you are using one of the ni-mh 4.8v batteries. Was it amount of vapor, th, or amount of heat that you were not impressed with? Going up in volts will make your drags shorter to produce more vapor, but it is not always the answer to find your perfect zone.