Hi all, looking for recommendations.

[Georgia Boy]

My own choice would be the zlide. By the way the new 4ml tank is now available it is a 24mm so you will have a bit of overhang but what the

 

[Mordacai]

Nice update @Georgia Boy.
Zlide 2/4ml Tank – A Better Vape Experience

 

[Daniel Forsyth]

Loli chose the Zenith, better than the zlide

 

[vaper1960]

OK folks... they are both good tanks Let's don't turn this thread into a debate (there are already discussions about that)
My little mod is also 22mm wide and I also chose a 24mm tank (RTA) because I wanted it... me and OP will have to live with overhang.
You don't have to, but it doesn't hurt to "break in" your coil at slightly lower watts. With the 0.8 ohm coils I would start around 14 watts and end up around 18 watts max. Airflow is up to the user... just don't close it all the way.
Loli, do you have juice picked out yet?

 

[vapdivrr]

I looked up your mod... nice little mod with decent built-in battery and 40 watts is plenty for MTL tanks. Keep in mind it's only 22mm wide so larger tanks will "overhang". I haven't tried one, but many people here recommend the Innokin Zlide. Zenith is also good but larger diameter. Learn how to prime coils (and do "primer puffs") Don't have time to explain right now. Also, learn about VG/PG ratios of juices.

You had to look up the eleaf istick mod, Where ya been? Lol

 

[vapdivrr]

OK folks... they are both good tanks Let's don't turn this thread into a debate (there are already discussions about that)
My little mod is also 22mm wide and I also chose a 24mm tank (RTA) because I wanted it... me and OP will have to live with overhang.
You don't have to, but it doesn't hurt to "break in" your coil at slightly lower watts. With the 0.8 ohm coils I would start around 14 watts and end up around 18 watts max. Airflow is up to the user... just don't close it all the way.
Loli, do you have juice picked out yet?

just have them look in the "picture of your set up" thread, I see tons of tube mods with massive tank overhangs.....overhangs are in .

 

[vaper1960]

You had to look up the eleaf istick mod, Where ya been? Lol

Just to see how wide it was

 

[vaper1960]

overhangs are in .

That's what she said

 

[vapdivrr]

Just to see how wide it was

Ok I feel stupid now.

Sent from my SM-G960U using Tapatalk

 

[Loli]

I looked up your mod... nice little mod with decent built-in battery and 40 watts is plenty for MTL tanks. Keep in mind it's only 22mm wide so larger tanks will "overhang". I haven't tried one, but many people here recommend the Innokin Zlide. Zenith is also good but larger diameter. Learn how to prime coils (and do "primer puffs") Don't have time to explain right now. Also, learn about VG/PG ratios of juices.

Before using, prime your coil (put a few drops down the top hole) Then fill tank with juice and wait 10 minutes. Between puffs, do "primer puffs" (draw air without firing) This may all be overkill, but will keep your coil wick saturated and prevent "scorched" taste. Don't do really long puffs amd let coil cool a bit between puffs. Once again, overkill, but doing these things will double the life of your coils. I can't afford to constantly replace coils so have become OCD about this. Besides that, it depends on the juice (VG/PG ratio... how thick it is) sweetness and some flavors. I vape about 4 ml a day (doing MTL) and get about a week or two from a coil. Don't push the coils beyond the rated wattage! Personally, I like 65VG/35PG juices but 70VG30PG is fine. 80VG/20PG is a bit thick and works better with different coils/tanks.
BTW, I have an Innokin T20 S tank and don't like it because of not enough airflow... I had to drill the holes bigger. Once I did this, I liked the coils much better. I use the 0.8 ohm most.

Ordered the Zetnith tank with 1.6 coil and 0.8 coil according to all of your recommendations, can not wait till I receive it... It’s such a shame that we don’t have a shop to go to and get the gear. So for a novice, it’s very hard and costly as we don’t know what to buy! Online shops won’t tell you’re buying the wrong tank for the mod you are buying... I ended up with a Uwell Crown 3 tank with the Eleaf Istick 40w mod!!! Massive disappointment as the Uwell required way higher wattage. Now stacked with a tank and coils I will never use... ($55). Beginners lessons I guess. Cheers

 

[Daniel Forsyth]

Ordered the Zetnith tank with 1.6 coil and 0.8 coil according to all of your recommendations, can not wait till I receive it... It’s such a shame that we don’t have a shop to go to and get the gear. So for a novice, it’s very hard and costly as we don’t know what to buy! Online shops won’t tell you’re buying the wrong tank for the mod you are buying... I ended up with a Uwell Crown 3 tank with the Eleaf Istick 40w mod!!! Massive disappointment as the Uwell required way higher wattage. Now stacked with a tank and coils I will never use... ($55). Beginners lessons I guess. Cheers

The Best place to find out what good stuff to buy is right here at ECF

 

[vaper1960]

Now stacked with a tank and coils I will never use... ($55). Beginners lessons I guess. Cheers

Not true... some day you might find a more powerful mod on clearance sale and finally use that tank (I am a very good bargain hunter) BTW, get extra coils for the Zenith if you didn't. Even if you won't need them for awhile, when the day comes that you do and have none... well, you know.
Innokin Zenith Vape Tank Replacement Coils (5-Pack)
$8.95 and free shipping.

 

[Daniel Forsyth]

Not true... some day you might find a more powerful mod on clearance sale and finally use that tank (I am a very good bargain hunter) BTW, get extra coils for the Zenith if you didn't. Even if you won't need them for awhile, when the day comes that you do and have none... well, you know.
Innokin Zenith Vape Tank Replacement Coils (5-Pack)
$8.95 and free shipping.

She would be better off getting them in Australia.
US prices too expensive after the shipping

 

[vaper1960]

Woops... didn't realize. Where do most people in Australia order?

 

[Daniel Forsyth]

Woops... didn't realize. Where do most people in Australia order?

Online Australian vape stores for a small quick order like batteries or coils.
And I usually go to Fasttech and Sourcemore for cheap mods and tanks, they have the cheap cheap shipping which is a good thing
They both have Zenith coils in too, $8.15 at Fasttech and $9.59 at Sourcemore

 

[Loli]

Online Australian vape stores for a small quick order like batteries or coils.
And I usually go to Fasttech and Sourcemore for cheap mods and tanks, they have the cheap cheap shipping which is a good thing
They both have Zenith coils in too, $8.15 at Fasttech and $9.59 at Sourcemore

Thanks Daniel, will need to order more next month

 

[Loli]

Ordered the Zetnith tank with 1.6 coil and 0.8 coil according to all of your recommendations, can not wait till I receive it... It’s such a shame that we don’t have a shop to go to and get the gear. So for a novice, it’s very hard and costly as we don’t know what to buy! Online shops won’t tell you’re buying the wrong tank for the mod you are buying... I ended up with a Uwell Crown 3 tank with the Eleaf Istick 40w mod!!! Massive disappointment as the Uwell required way higher wattage. Now stacked with a tank and coils I will never use... ($55). Beginners lessons I guess. Cheers

Been using the Zenith tank for 4 days now and loving it! Using the 1.6 coil and can’t wait to try the 0.8 as I ordered 4 of them. Cheers everyone

 

[Daniel Forsyth]

Been using the Zenith tank for 4 days now and loving it! Using the 1.6 coil and can’t wait to try the 0.8 as I ordered 4 of them. Cheers everyone

Really Glad you like it

 

[Nermal]

Before using, prime your coil (put a few drops down the top hole)

Just for clarity, this is the top hole of the coil head. You will need to remove it from the bottom of the Zenith. It will come with clear instructions and illustrations.

 

[Daniel Forsyth]

Thanks Daniel, will need to order more next month

As mentioned both Sourcemore and Fasttech are a Fantastic cheap source for anything that you need, from coils to tanks to mods. It just takes a week or two longer than OZ stores and all free or very cheap shipping.
All batteries Must be purchased from Australia as they don't ship them overseas