I have a smok AL 85. It has a screen that easy until you get to setting. I understand stealth but the rest is Greek to me. Help please!
Hi from Charlie
- Thread starter Charlie Hustead
- Start date
- th_trl_thread_readers 0
- Status
Hello and welcome to ecf ! 
Concerning your issue we'd need a bit more detail as i'm confused as to what's your issue here or what you're trying to accomplish......
Concerning your issue we'd need a bit more detail as i'm confused as to what's your issue here or what you're trying to accomplish......
Hello and welcome aboard. Did this device come with a user manual? Whether it did or didn't, ask any questions you have with some more detail and I'm sure you'll receive a few helpful replies.
HI and welcome. As said, we don't understand your question. What do you want to know how to do?
Welcome and glad you joined.
The information below may help you with answering your question.
Might like to read the following compilations:
dannyv45's blog | E-Cigarette Forum
diy_beginners_guide - DIY_eJuice
http://www.thevaperstable.com/diy/
http://www.ejuicemakers.com/help/
Getting Started: DIY 101 – Mixing Your Own eLiquid
http://diyordievaping.com/category/latestnews/beginnertips/
A Beginner's Guide To Making The Most Highly-Rated Recipes by Scottes777 • r/electronic_cigarette
What you need to know as as far as supplies and safety for the first time juicer. | E-Cigarette Forum
If you have a manual, read it. If you are asking what the different settings are, you are going to probably have a wattage mode (this is straight power, and what many vapers use) a TC mode (used only for temperature control coils, which must be made of specific materials other than kanthal, such as stainless steel and titanium or Nickle, and some vapers use that for a smooth, consistent vape, at that point you would be setting your tank up to a specific temperature that you like (either F or C) and a starting wattage mode to start your TC coil going, and there are often other user modes, depending on the mod.
If you don't have the manual, go ahead and watch some YouTube reviews, they will demonstrate the various features of your mod's control board, even when I read the user manual I usually go ahead and watch some videos as for me, a picture is worth a thousand words.... This should become clear as you go. For now, you can certainly run it on wattage mode, just make sure you aren't increasing your wattages over your coil's highest resistance recommendation (which is usually printed in tiny print on the coil). Stealth mode does kind of explain itself, LOL.
Good luck!
Anna
If you don't have the manual, go ahead and watch some YouTube reviews, they will demonstrate the various features of your mod's control board, even when I read the user manual I usually go ahead and watch some videos as for me, a picture is worth a thousand words.... This should become clear as you go. For now, you can certainly run it on wattage mode, just make sure you aren't increasing your wattages over your coil's highest resistance recommendation (which is usually printed in tiny print on the coil). Stealth mode does kind of explain itself, LOL.
Good luck!
Anna
- Status
Similar threads
- Question
