High-end bottom feeding RBA

[Intervap]

So it seems like I have all that I need...what could I spend my money on? Another unnecessary atomizer! Of course!
Don't get me wrong, I LOVE my Reomizers! They are the best vape I have ever gotten and with my recent semi-sub-ohm coil (.9 ohm) it just keeps getting better!
However, I would really like a nice bottom feeding rba that has air flow control. I have never modified any sort of vape gear, so if the rba requires it I want it simple and stupid.
Any recommendations? Give me your favorite for your Reo and I can go from there
Thanks in advance!

 

[thinkingaboutit]

There is a sticky on compatible rbas for the reo...I'd start there. My guess is with the diameter limitation you will be modding something. If you have to mod...why not start with the best? By best I do mean rm2.


Thanks to my phone, I could have posted this from anywhere.

 

[element77]

However, I would really like a nice bottom feeding RBA that has air flow control. I have never modified any sort of vape gear, so if the RBA requires it I want it simple and stupid.
Any recommendations? Give me your favorite for your Reo and I can go from there
Thanks in advance!

you should persuade a member on here who has made some excellent air control rings for the RM2 to trade you something for one. No fuss modding your own and you get to reach out to a fellow reonaut for actual interaction No cash and it's no problem here, post on the trade thread

 

[Intervap]

you should persuade a member on here who has made some excellent air control rings for the RM2 to trade you something for one. No fuss modding your own and you get to reach out to a fellow reonaut for actual interaction No cash and it's no problem here, post on the trade thread

I didn't know people were doing this! Sounds more up my ally, despite the money wasting part

 

[ChrisEU]

You can try to find one of the (rare) Chalice adapters that MarkBugs produced to fit the Chalice into the Original Mini 14500. They work great to elevate the Grands 510 connection, so that you can use any size atomizer. Then you can mod any dripper for bottom feeding - even the fancy ones.

But then again, they aren't necessarily better - just fancier =)

 

[pdib]

you should persuade a member on here who has made some excellent air control rings for the RM2 to trade you something for one. No fuss modding your own and you get to reach out to a fellow reonaut for actual interaction No cash and it's no problem here, post on the trade thread

talkin' 'bout me .. . . . ?

 

[darkzero]

Unfortunately there's not that much currently out there due to size & bottom feed ability. Many can be modded for bottom feeding though. And the ones out there that are desirable are hard to find. Unfortunately I can't comment one which ones though.

 

[clyde2801]

Chris Creations Fatty v2 RBA has air flow control, and they can mod it to BF on Reos. OKC Vapes sells them; they're about twice as expensive as a RM2.

 

[Vapeaddikt]

Chris Creations Fatty v2 RBA has air flow control, and they can mod it to BF on Reos. OKC Vapes sells them; they're about twice as expensive as a RM2.

Is the vape quality any better or worse?

 

[element77]

talkin' 'bout me .. . . . ?

you've done some fine contribooting. I dig the ring alot!!

 

[Jeremy Evans]

Chris Creations Fatty v2 RBA has air flow control, and they can mod it to BF on Reos. OKC Vapes sells them; they're about twice as expensive as a RM2.

I modded my ERA clone to fit on my Mini 18490(not Mini 2.1) with nothing more than a drill bit and some sand paper, so I dont see why they would just shave off the 1mm to make it fit in the cup on the reos instead of making an elongated 510 connector. Don't get me wrong It is cool that they do that but there is a better way

 

[pdib]

View attachment 257976
you've done some fine contribooting. I dig the ring alot!!

that's funny! Because I was actually going to write, "watchyew talkin' bout, Willis?" . .. originally.

 

[FEEDER]

You can also use the adapter that comes with the killer, to lift any RBA high enough to use on any reo
Frank

 

[clyde2801]

Is the vape quality any better or worse?

Roughly the same as a RM2, perhaps a bit more vape. What the CCF really has going for it is taste! I don't know how it does it, but flavors really pop, even with just ordinary silica wicks in it. I'd say it's on par with, maybe even a touch better than using a SS wick on a RM2. Whether those features are worth paying twice as much as Rob's mighty fine rebuildable is entirely a subjective decision.

And why they decided to elongate the base to make it fit is beyond me. Wasn't my call. Eh...

 

[newconvert]

You can try to find one of the (rare) Chalice adapters that MarkBugs produced to fit the Chalice into the Original Mini 14500. They work great to elevate the Grands 510 connection, so that you can use any size atomizer. Then you can mod any dripper for bottom feeding - even the fancy ones.

But then again, they aren't necessarily better - just fancier =)

ok you got me!! how would i go about modding say an atomic or reactor for bottom feed? i am getting a lukkos puzzle box but have no bottom feeders, if you dont count the ebaron pro or the killers? thanks in advance!!

 

[artbyshan]

The Cyclone has an accessory called the Cyclops which adds air flow control. I don't personally own one, but they look neat (Indy Vapors has both).

 

[reoluvr]

I would say get a cyclone. if you get the airflow control top cap it may not fit without modding though. I use a regular cyclone with the stock top cap drilled out and its incredible with .08 microcoil

So it seems like I have all that I need...what could I spend my money on? Another unnecessary atomizer! Of course!
Don't get me wrong, I LOVE my Reomizers! They are the best vape I have ever gotten and with my recent semi-sub-ohm coil (.9 ohm) it just keeps getting better!
However, I would really like a nice bottom feeding RBA that has air flow control. I have never modified any sort of vape gear, so if the RBA requires it I want it simple and stupid.
Any recommendations? Give me your favorite for your Reo and I can go from there
Thanks in advance!

 

[reoluvr]

Hi. i got a puxxlebox last month but i had to send it back for refit because it wouldnt fit any of my bf attys - did yours have that problem?

ok you got me!! how would i go about modding say an atomic or reactor for bottom feed? i am getting a lukkos puzzle box but have no bottom feeders, if you dont count the ebaron pro or the killers? thanks in advance!!

 

[newconvert]

Hi. i got a puxxlebox last month but i had to send it back for refit because it wouldnt fit any of my bf attys - did yours have that problem?

no, my puzzle box was i am sure the same as yours, it is designed more for the Giotto atty, so i use a 520 modders connector to raise the center post and use the RM2 as well as other bottom feeders, simple.

 

[reoluvr]

I sure wish i had known that - i sent mine back to Italy to the modder to retrofit and Im getting worried i May never see it again due the post office.

no, my puzzle box was i am sure the same as yours, it is designed more for the Giotto atty, so i use a 520 modders connector to raise the center post and use the RM2 as well as other bottom feeders, simple.