High(er) drain 14mm battery/mod

[DavKan]

I am planning on buying a kayfun mini 2.1 and im looking for the the highest drain 14mm solution possible. From what i see the only options are 10440 mods and ego batteries. I want to use a LR cotton microcoil.

Will a good 10440 battery handle more amps than your standard ego? I'm looking at the precise+ 10440 mod.

Are there any ego batteries that out preform ego c/ego c twist? Also do different mah egos have different amp limits?

Are there any other 14mm options?

 

[EddardinWinter]

I have never heard of running a kayfun this way. Here is a great place to start with your battery questions.

Basic to Advanced Battery Information from Battery University

 

[Paul.K]

Ba gua 14500 mod. It has a magnetic button instead of spring and it looks fantastic. I also saw a polished brass version at the store but it's not listed online for what ever reason.

Ba gua Mod Stainless Steel - Mechanical - Devices

 

[snork]

The Kayfun Mini fires fine on my P+10440 but I doubt for very long. Most 14500 battery mods will be much more suitable both in terms of battery life and looks.

 

[DavKan]

Alright I'll stay away from the 10440 unless i can pick up a p+ on the cheap. I'll get a 14500 instead and just use my egos when i need to be real discrete. Thanks for the advice all

 

[Baditude]

Ego batteries and any replaceable battery smaller than an 18350 battery is going to have disappointing battery performance due to limited amperage and mAh capacity. These batteries are just too small and weak for a high performance Rebuildable. Basically would be a waste of hard-earned money IMO.

 

[DavKan]

I imagine it'd spend most of of its life on my larger mods, but I was looking for a thin form factor battery for when i want a small/discrete vape. Seeing that there isn't any better options i'll just throw it on one of my neglected egos if need be.

 

[JMarca]

I am planning on buying a kayfun mini 2.1 and im looking for the the highest drain 14mm solution possible. From what i see the only options are 10440 mods and ego batteries. I want to use a LR cotton microcoil.

Will a good 10440 battery handle more amps than your standard ego? I'm looking at the precise+ 10440 mod.

Are there any ego batteries that out preform ego c/ego c twist? Also do different mah egos have different amp limits?

Are there any other 14mm options?

Low resistance micro coils on small batteries is just asking for trouble.

 

[snork]

Low resistance micro coils on small batteries is just asking for trouble.

Yeah, I overlooked that on first reading. It would be best to stick to 1.5 ohms + on the little batts. Nice vape in any case.

 

[DavKan]

I was thinking 1.4 1.5 ohms, I thought that was considered LR. That should keep it under the 3 amp limit of the egos. Nothing sub ohm or anything. Is there any reason a 1.5 ohm micro coil would be different from a regular wrap?

 

[Symmetry]

A PiculiSci at 1.5 ohms would be killer on a P+10...

 

[Ryedan]

I was thinking 1.4 1.5 ohms, I thought that was considered LR. That should keep it under the 3 amp limit of the egos. Nothing sub ohm or anything. Is there any reason a 1.5 ohm micro coil would be different from a regular wrap?

No reason at all. All the battery cares about is amps drawn. In my experience eGo's don't like to go much lower than around 1.5 ohms. Too low and they shut down and you have to put them on the charger for a few seconds to bring them back.

 

[Flyer]

I vape a 14500 mech exclusively. The size and form factor suit my needs best. But, I also go through a lot of batteries each day. May turn out to be too much bother for some and that should be considered before investing a lot of money.

 

[DavKan]

I don't mind carrying a bunch of batteries, I usually have a bag with me. Its just hard to be discreet with a 22mm 18650 mod. I do need to invest in a 14500 mod and will once i purchase a euforia. I like the look of that PiculiSci. I haven't taken the leap into gennys yet but it seems like a quality little rba.

 

[Mitey F]

I vape a 14500 mech exclusively. The size and form factor suit my needs best. But, I also go through a lot of batteries each day. May turn out to be too much bother for some and that should be considered before investing a lot of money.

May I ask what batteries you use? I recently picked up a GP 14500 mod (which is great) but I only have protected batteries, which won't fire anything with a low enough resistance to get a good vape. I'm wondering what the highest drain 14500 battery is... it seems most are around 700-900 mah, which is fine, as most of my 18350's are in that range too, and last me a good chunk of the day at work.

 

[Mitey F]

I don't mind carrying a bunch of batteries, I usually have a bag with me. Its just hard to be discreet with a 22mm 18650 mod. I do need to invest in a 14500 mod and will once i purchase a euforia. I like the look of that PiculiSci. I haven't taken the leap into gennys yet but it seems like a quality little rba.

I've found the best way to be "discreet" (without using a mini ego, around 400 mAh) is to use a very small 18350 mod. The easier it is to conceal it in your hand the better. Length is much more of a factor for conceal-ability than diameter, and a 14500 is always going to be longer than an 18350!

 

[Flyer]

I only use AW IMR 14500's. I haven't found anything with better specs and reliability, yet.

 

[WidowsSon]

I like 14500 mods, (super to simplicity

check the microstick for discretion though its an 18350 mod and easier to pocket.

Loocking for my next 14500 personally... hmmmm