hole in 7V atty deformed?
- Thread starter shaun
- Start date
- th_trl_thread_readers 0
- Status
No. China didn't make the holes right so Imeo had to enlarge them before he sent them to his sellers.
then why does the 7V atty on the website have normal holes? see below:
Vapor Kings - JOYE 510, JOYE EGO, DSE801, RN4072, DSE901, RN4075, RN4062 and KR808D-1 e-Cigarette batteries, atomizers, cartomizers, e-Liquid, accessories and more!
Vapor Kings - JOYE 510, JOYE EGO, DSE801, RN4072, DSE901, RN4075, RN4062 and KR808D-1 e-Cigarette batteries, atomizers, cartomizers, e-Liquid, accessories and more!
Shaun
This last batch of iattys that Imeo got from china did not have the right size hole for it to work correctly in the AFS. Imeo had to enlarge the hole some. At 7.4 the i7 iatty would not have functioned correctly in the AFS at the size of hole that China spec it at. 7.4 volts uses a lot more liquid than 6 or 3.7 volts so there for the hole has to be a little larger than your i6 iatty or i3 iatty so more liquid will go into the iatty while using the AFS so it doesnt burn it up. Your iatty is not deformed it is the same as all the rest of the i7 iattys we have.
Thanks
Michelle
This last batch of iattys that Imeo got from china did not have the right size hole for it to work correctly in the AFS. Imeo had to enlarge the hole some. At 7.4 the i7 iatty would not have functioned correctly in the AFS at the size of hole that China spec it at. 7.4 volts uses a lot more liquid than 6 or 3.7 volts so there for the hole has to be a little larger than your i6 iatty or i3 iatty so more liquid will go into the iatty while using the AFS so it doesnt burn it up. Your iatty is not deformed it is the same as all the rest of the i7 iattys we have.
Thanks
Michelle
I made the hole like this so the o-ring of the AFS cant get hurted Shaun my friend. You see that this hole is larger but deeper too
Imeo friend, do we need i7 or i6 atty for AVS ore they required for AFSv2 only?
btw. It would be great if you can make a vid or tell the options for all attys (510/901/801) on AVS
For instance - do they all need to be modified etc etc?
Thanks
btw. It would be great if you can make a vid or tell the options for all attys (510/901/801) on AVS
For instance - do they all need to be modified etc etc?
Thanks
Last edited:
Imeo friend, do we need i7 or i6 atty for AVS ore they required for AFSv2 only?
btw. It would be great if you can make a vid or tell the options for all attys (510/901/801) on AVS
For instance - do they all need to be modified etc etc?
Thanks
Booker my good friend , I will tell you exactly what is going on with all atties:
901 works without modification
510 needs a china adapter to work. Maybe the adapter needs a little modofication by "eating" its surface about 0,5-1mm from the side that aromizer screws on it. I will make my own adapters for this soon
801 doesnt work now with AFS because I havent made the right experiments BUT AFS is made to fit already the 801. But I think that maybe 801 works already with an 901-801 adapter. If you want to try it then please do it and tell me your results.
Regular 901 Atty's and HV 901 Atty's run fine with no modification what so ever as far as im concerned I use them both all the time in my AFS, In my opinion as well all Attys will work on the V2/AFS if you can get them to fit
Cheers my good friend Imeo.Booker my good friend , I will tell you exactly what is going on with all atties:
901 works without modification
510 needs a china adapter to work. Maybe the adapter needs a little modofication by "eating" its surface about 0,5-1mm from the side that aromizer screws on it. I will make my own adapters for this soon
801 doesnt work now with AFS because I havent made the right experiments BUT AFS is made to fit already the 801. But I think that maybe 801 works already with an 901-801 adapter. If you want to try it then please do it and tell me your results.
I have China 901-510 adapter here, will have a look.
Also, will have 801 VHV and BE112LR and I already have a cunning plan how to make them work with AVS, but it requires to do a "bad" thing to them (no, not drilling a hole, worse
) so I'll order 901-801 adapter and see with it first.And aha, 302 atty threads looks promising too.
Last edited:
Cheers my good friend Imeo.
I have China 901-510 adapter here, will have a look.
Also, will have 801 VHV and BE112LR and I already have a cunning plan how to make them work with AVS, but it requires to do a "bad" thing to them (no, not drilling a hole, worse
And aha, 302 atty threads looks promising too.
510 doesnt need holes and maybe 801 doesnt need too. Just put only the adapters.
Only cartos need holes
302 atty? what are these atties?
Oka.
Penstyle, like 801 but they have two extra holes (oposite sides) in the thread. See pic.imeo said:
Also the center pin is a bit more "inside" the atty than in 801. For instance, China adapter for 801 wasn't working for me for 302 (I had to mod the 302 center pin)
btw. what is the reason 510 and 801 need adapters for AVS?
Attachments
Last edited:
thanks a lot for the pic booker
510 and 801 needs adapter because AFS has an 901 connector.
ok thanks.
damn, I really need to go sleep now. LOL.
me too. Time here is 5:12 am. You are lucky, your time is 3:12 am
hahaha, yes but they are away from me, I am in my house, I am going to lathe again in 2 hours and I have huge work to do booker. The only good thing is the sun that makes me feel better!
- Status
