HOLY MODS!!! (5 New Mech Mods on Fasttech and More!)

[Grizzie]

Check this one out $26.53 Electronic Cigarette Battery Compartment - stainless steel / silver at FastTech - Worldwide Free Shipping
They have it in stainless steel and all brass. (not sure of the name)

Eight Diagram mod - $20.13 Eight Diagrams Mod Electronic Cigarette Battery Compartment at FastTech - Worldwide Free Shipping

Private V2 (Brass, Stainless Steel, Copper) - $20.96 Private V2 Telescoping Mech Mod E-Cigarette Battery Compartment - brass + copper + stainless steel at FastTech - Worldwide Free Shipping

Private V2 (Brass, Stainless Steel - $16.98 Private V2 Telescoping Mech Mod E-Cigarette Battery Compartment - brass + stainless steel at FastTech - Worldwide Free Shipping

Kanger Protank 2 - $15.41 Kanger Protank-? Clearomizer w/ Pyrex Glass Tank (2.5mL) - authentic Kangertech product / translucent / 2.5

Smoktech S.I.D (KIT) - $61.14 Smoktech S.I.D Variable Voltage E-Cigarettes Set with 0.8" LED Screen - 1*18650 / silver / US plug charger at FastTech - Worldwide Free Shipping

 

[volume control]

Just an FYI to anyone buying these mechs, this one

Private V2 (Brass, Stainless Steel, Copper) - $20.96 Private V2 Telescoping Mech mod E-Cigarette Battery Compartment - brass + copper + stainless steel at fasttech - Worldwide Free Shipping

Has a SS center pin, and you would be better off with the 16.98 or even cheaper 12 dollar aluminum Private V2

 

[MikeA5]

Thanks Grizzie for the info.
Just ordered the $26.53 Electronic cigarette battery compartment stainless.
I was looking for another mech mod at a good price!

 

[dr g]

Not to keen on how some of these are starting to have the production-like engraving...

 

[Grizzie]

Thanks Grizzie for the info.
Just ordered the $26.53 Electronic cigarette battery compartment stainless.
I was looking for another mech mod at a good price!

No problem let me know how it is when you get it.

 

[tearose50]

I found this write up and thought it worth passing on.



"4:13pm Aug 14

CHI YOU CLONE SAFETY WARNING

Hello. Some of you know that I run a site called FatDaddyVapes.com. ..... I will not be carrying any of the new Chi You clones. All the Chi Yous clones on the market right now are made by one manufacturer. This includes the ones that Fasttech sells. I know the manufacturers and am actually friends with them. I tried stopping them but they said that there is already a lot of orders committed.

There are 3 flaws that could be disastrous.

1 – The adjustment screws pins on top are short. This was designed using protected batteries. If you are using unprotected batteries like most mechanical mod users, the pin will get loose when you try to make it fit. It might work but once unattended, or if placed on a vehicle with vibrations, could get lose, cut the battery insulation, and cause a short leading to a leak – or worse, an explosion. THIS COULD HAPPEN EVEN WITHOUT AN ATOMIZER AND THE SAFETY ON!!!

2 – The bottom cover/switch assembly wobbles. This WOULD (as opposed to “could”) also cause an accidental misfire. Again, fire, injury, or property damage risks as a result of leaking or explosion. This could happen only if an atomizer is attached. EVEN WITH THE SAFETY ON, IT WOULD STILL FIRE BECAUSE THE CONTACT ROD INSIDE IS ALSO TILTED!!!

3 – THE WORSE. The bottom cover does not have any insulation. If you use those gray Panasonic batteries, IT WILL FIRE AS SOON AS YOU GET THE CAP ON IF YOU HAVE AN ATOMIZER ON!!! The gray Panasonics do not have the extra insulation at the bottom. (The bottom is exposed.) Even other brands are susceptible to this is you microcoil or sub-ohm because the battery shrink tube shrinks when heated.

I found a fix for it. Unfortunately, I still need it manufactured – IN CHINA! Unless one of you guys can make me custom brass bolts or has access to specialized small machinery hardware. Message me if you could help me expedite this process.

If you already have one of these Chi Yous, make sure that you use protected batteries. Also, go to Home depot and buy O-rings to be placed on the inside perimeter of the bottom cover. After all your adjustments are done, LOCTITE (Blue) that damn switch so it won’t get loose!!!

VAPE SAFE!!!"

 

[MikeA5]

I thought this worth passing on:

"4:13pm Aug 14

CHI YOU CLONE SAFETY WARNING

Hello. Some of you know that I run a site called FatDaddyVapes.com. ..... I will not be carrying any of the new Chi You clones. All the Chi Yous clones on the market right now are made by one manufacturer. This includes the ones that Fasttech sells. I know the manufacturers and am actually friends with them. I tried stopping them but they said that there is already a lot of orders committed.

There are 3 flaws that could be disastrous.

1 – The adjustment screws pins on top are short. This was designed using protected batteries. If you are using unprotected batteries like most mechanical mod users, the pin will get loose when you try to make it fit. It might work but once unattended, or if placed on a vehicle with vibrations, could get lose, cut the battery insulation, and cause a short leading to a leak – or worse, an explosion. THIS COULD HAPPEN EVEN WITHOUT AN ATOMIZER AND THE SAFETY ON!!!

2 – The bottom cover/switch assembly wobbles. This WOULD (as opposed to “could”) also cause an accidental misfire. Again, fire, injury, or property damage risks as a result of leaking or explosion. This could happen only if an atomizer is attached. EVEN WITH THE SAFETY ON, IT WOULD STILL FIRE BECAUSE THE CONTACT ROD INSIDE IS ALSO TILTED!!!

3 – THE WORSE. The bottom cover does not have any insulation. If you use those gray Panasonic batteries, IT WILL FIRE AS SOON AS YOU GET THE CAP ON IF YOU HAVE AN ATOMIZER ON!!! The gray Panasonics do not have the extra insulation at the bottom. (The bottom is exposed.) Even other brands are susceptible to this is you microcoil or sub-ohm because the battery shrink tube shrinks when heated.

I found a fix for it. Unfortunately, I still need it manufactured – IN CHINA! Unless one of you guys can make me custom brass bolts or has access to specialized small machinery hardware. Message me if you could help me expedite this process.

If you already have one of these Chi Yous, make sure that you use protected batteries. Also, go to Home depot and buy O-rings to be placed on the inside perimeter of the bottom cover. After all your adjustments are done, LOCTITE (Blue) that damn switch so it won’t get loose!!!

VAPE SAFE!!!"

Thanks for the heads up!
Will use your suggestions that you made once I receive the clone.

Thanks,
Mike

 

[tearose50]

Glad it was helpful.
I would like to clarify, I didn't write it nor can I evaluate it's contents.
These kinds of details are above my pay grade.

 

[MikeA5]

Glad it was helpful.
I would like to clarify, I didn't write it nor can I evaluate it's contents.
These kinds of details are above my pay grade.

When I receive it I'll let you know how it works, but I'm thinking of using it with a nipple top protected Li-ion 18650 battery at first with a vapesafe fuse placed on the bottom of the battery. I may also try using it with a "Kick" by Evolve with a 18650 IMR battery, but I'll have to see how everything fits in the tubes.