How do I get my Boba's Bounty out of this giant cartomizer

[TulsaClint]

So, I filled up this huge dual coil cartomizer with Boba's and it's not vaping well at all. I must've put 50-60 drops in this thing. My question is, how should I get the juice out? Will I have to just sacrifice the cartomizer since most of it is in the filler? Is there any way to minimize the huge mess I'm probably about to make?

 

[jnnfrlsw]

Do a search on here and youtube for the reverse Taryn spin. I remember seeing it used to get juice out of a carto.

 

[six]

Why not just make the carto work? Pull your post.

 

[TulsaClint]

Thanks guys, I'll check out the suggestions when I get home. I started to look on YouTube here at work, but the wifi is lousy and my videos froze.

 

[Ratman]

Why you spin it out and then give it to me so I can try it out for the first time Clint. Btw, glad you liked the Prime 15! I have another bottle if you want to swap me for a little Boba's or Gandolf. Looking forward to trying them both.

 

[TulsaClint]

Haha, yeah I haven't tried getting it out of there yet, too afraid of making a mess.

I've got a pretty big bottle of Gandalf, I could fill an empty Halo sized bottle with it if you want.

 

[mwa102464]

Just crank up your voltage some and vape away on the Mug

 

[Ratman]

Haha, yeah I haven't tried getting it out of there yet, too afraid of making a mess.

I've got a pretty big bottle of Gandalf, I could fill an empty Halo sized bottle with it if you want.

Hey that sounds like a plan. Sending you a PM about it.

 

[zerominusone]

I couldn't ever get that Taryn spin thing to work. Don't know why. I did it just like in the video. I also duct taped the carto to a blade on the fan and turned it on. Even after spinning on the fan for a minute, nothing came out. Finally I just ripped all the filler out with a pair of tweezers and put it in a syringe and squeezed the juice out.

 

[HzG8rGrl]

If you have a syringe, you can put the needle in the filler and pull out most of the juice.

 

[TulsaClint]

Just crank up your voltage some and vape away on the Mug

Yeah, tried that. I get the burnt taste going on.

 

[TulsaClint]

If you have a syringe, you can put the needle in the filler and pull out most of the juice.

I'll give that a try before I destroy the filler.

 

[~Sue~Feb2012]

Why not just make the carto work? Pull your post.

omg, wish I had seen this before I threw out a few I thought were bad (maybe they were, but I could have pulled the post and tried again had I known
Yet another reason I love this forum! Learning new things all the time this place rocks!

 

[TulsaClint]

omg, wish I had seen this before I threw out a few I thought were bad (maybe they were, but I could have pulled the post and tried again had I known
Yet another reason I love this forum! Learning new things all the time this place rocks!

Yeah, the carto works, it just doesn't produce much vapor at all, but I still get the flavor of the juice. I've just been vaping it now and then. Next time, I just won't put thick juice in it.

 

[BlueSnake]

Yeah, the carto works, it just doesn't produce much vapor at all, but I still get the flavor of the juice. I've just been vaping it now and then. Next time, I just won't put thick juice in it.

I just got some Boba's yesterday for the first time. I filled a 510 xl cart to put in a tank. It does take longer to fill a carto with this juice do to the thickness. Did you get it completely full? When I fill a carto I usually fill slowly letting it soak into the carto and repeat until it starts to drip out the bottom. Then I gently blow through the carto to clear the center hole and then clean the carto post off good before screwing it in.

By the way my carto with the tank work well with Boba's it just took me a little while to get it saturated clear to the bottom.

Hope that helps.

 

[TulsaClint]

Thanks, I thought I got it full with as much as I put in it, it also kind of ran a bit out the bottom. I don't really have any more Boba's at the moment to fill it more so I'll just vape it until it's dry then try a thinner juice before I write it off as a crappy dchv carto.

 

[just one day]

If you want to remove the BB from the carto so you can try another juice this is what I have done and has worked although there is still some residual flavor left in the carto. Take about 2 cups of water and boil it in the microwave. Take it out and drop the carto in and stirr it around. Go have a vape. Take the carto out buy grabbing it by the fill end with some tweezers or some equivalent so that the connection end is facing down and the hot water drains out of it. Dunk it in the water and drain it several times untill the water kinda Yuk. Set the carto on some paper towles , boil some fresh water and do the whole thing again. Repeat to your satisfaction. Let the carto cool, blow it out, let it sit in a dry place for a few days untill the polyfill drys out then fill with your next flavor. Hope this helps , has worked for me, your mileage may vary