How do I Take the menthol out of RN4081 Ceramic Cartomizer?

[Some1OnThisForum]

How do I Take the menthol out of RN4081 Ceramic Cartomizer?

I just received a big order of e-liquids in the mail today, and I have to wait 2 days for my New Cartomizers and 510 kit to arrive.

My problem is I have 2 cartomizers with my rn4081. One im using for my RY4, and the other one is Ceramic tip with menthol that i got for free...I HATE MENTHOL.

I want to try my new e-liquids out on it without this crap menthol taste. How do i take the menthol out of this cartomizer?

 

[dormouse]

Ceramic carto for RN4081? You mean like a CE2 a reservoir carto? You could try a syringe through the correct place for filling CE2 cartos. Try sucking it out with the syringe. See GotVapes for Fluxomizer filling videos? - and you do the opposite to suck out the juice best you can. Then fill with unflavored PG using the syringe and then shake it then remove that with the syringe. Do again until what you remove doesn't smell like menthol? Your only other option with a CE2 is to remove all of the seals to pour/rinse it out, dry, then spend a long time trying to get those seals back in correctly. Look for a Youtube video on cleaning CE2

For stuffing type carts, maybe you can spin it out - search youtube for Reverse Taryn Spin. I've done that with a KR8 carto.

 

[Some1OnThisForum]

thank you for your reply, Sounds like alot of work, i guess i will have to just wait till 2morrow.

 

[bombastinator]

I've never eve heard of rn4081 ceramic carto. IIRC rn4081 cartos are njoye plastic style. If you don;t care if you wind up destroying the thig I've got a few ideas:
If it works like an njoye you could try pulling the bottom off and washing out the top.

Another thing you could try is to soak the uice out. Get some distilled water, heat it warm inthe microwave, fill a shot glass with it and drop the carto in. Let it sit for an hour or so then repeat a few times, blowin as much water as you can out of the carto between soakings. Then let dry

 

[bombastinator]

I am interested in a ceremic rn4081 carto if available though. What brand was it?

 

[fray]

If it is a ce2 then the tube should slide off if the connector. Clean out the juice and rinse off the wick. Pat it dry with a paper towel and do a couple dry burns.

Works with my fluxomizers

 

[zoiDman]

Menthol is about the toughest to get out.

Try soaking in White Vinegar for an hour and then a hot rinse. If you have any DIY flavors laying around you could put a drop or two of what ever flavor you are going to onto the atty/wick.

 

[bombastinator]

I have confirmed that royal smokers does not make a rn4081 carto. One could still do it with a standard 510 by buying an adapter.

 

[DawnsDone]

I only read your post and not the others so I apologize if this is a double but...

I got the bloog cartomizers in flavor "red". OMG I wanted to gag. Had to brush my teeth a thousand times and still all I can taste is off tasting peanuts

ANYWAY, those were the only flavor I ordered since they were out of blanks, so I needed to get that awful and very very strong flavor out (usually i can barely taste most juices so I cant imagine how anyone could be vaping that).

I tried rinsing them in hot water and soaking them in vodka and it was still there.

Finally I soaked them in warmed (not boiling) vinegar for 1/2 hour, then I used a turkey baster and flushed the vinegar through like 5 times each. Then I soaked in warm water for 10 minutes followed by a quick rinse just to get the vinegar out, I blew them out then put them in the oven at 175 to dry.

Two hours later they were finally dry and that dreaded taste is GONE!

I dont know about ceramic ones? but it worked great in bloog cartos