HOW LOW CAN YOU GO? (and do you?)

[pdib]

So I'm doing these genesis setups with .8Ω resistance and trying to find a new mission. Who all is building lower than .8, and what's it like? I've got the MNKE batts with the 20amp continuous discharge rating. (I read where their Pulse rating is 80amps!) How low is a smart place to stop (.5Ω)?

 

[Thrasher]

i seen as low as .6 but im a wuss and thats too much for me. theres a vid of someone with a dripper pro at .6 and its blowing out the clouds

 

[vapdivrr]

28g on the ac-9 wick/ 2/3 wrap @ 0.6 ohms. really rocks, but cannot be my all day for sure. it seems like i only vape this set-up when having a few drinks on the weekend. for the most part 28g/ 0.8 ohms on mechanical mod/ or 28g 1.1 to 1.2 ohms @ 3.8 to 4.0 on provari v-2

 

[WinchellNomNom]

I like .6-.7, with a few wraps of 28 and 30 awg (depending on rba) , but only on a few setups and only on drippers.

Most of my juices are fruit and can't handle the heat from a few coils at that low of ohms. They just don't taste good. Ry4 and most tobaccos do well at those heat levels for me.

Sent from my SCH-I605 using Tapatalk 2

 

[vapdivrr]

i think that once over like 17 watts the flavor in juices starts to decline, no matter what kind of juice it is. i havent tried alot of juices over 17 watts, but to much power starts to mute the flavors.

 

[thecatanddog]

I haven't gone below .9 but that seems to be where i am at right now with a Phoenix, an IGO L and a prototype RBA that hasn't come out yet. .9 is pretty intense to be honest. i prefer around 1.2-1.4

 

[vapdivrr]

I haven't gone below .9 but that seems to be where i am at right now with a Phoenix, an IGO L and a prototype RBA that hasn't come out yet. .9 is pretty intense to be honest. i prefer around 1.2-1.4

are the phoenix and igo-l drippers? i dont actually own one, so not sure how these resistances differ from a genesis.

 

[pdib]

The phoenix is a great little rebuildable dripper. Set up a vertical ss mesh in it. like a mini tankless genny

 

[vapdivrr]

The phoenix is a great little rebuildable dripper. Set up a vertical ss mesh in it. like a mini tankless genny

sounds pretty neat.

 

[pdib]

I just looked at that IGO-L thread. That IS a tankless AGA

 

[45root]

are the phoenix and igo-l drippers? i dont actually own one, so not sure how these resistances differ from a genesis.

ya they are drippers.

all my setups are 3/4 wraps of 28g that come in at 0.6 or 0.7 ohms. it takes a couple batteries per day but i can get great flavor and vapor through the entire battery. i have just gotten some ribbon wire in and trying that now. all my vv mods are dead so i cant check ohms right now. i would guess its at about .9 with 3 wraps. when i did 4 wraps the vapor took a while to build up.

 

[WinchellNomNom]

Those igo-l's are my favorite rba right now. So easy to build and perform like champs. They look like aga-t2's minus the tank. Same manufacturer

Some pics of packaging and the atty







Sent from my SCH-I605 using Tapatalk 2

 

[pdib]

ooh, I like that look! There it is, sitting atop my "Natural". Looks very "Euro" for some reason.

 

[pdib]

How much liquid does it hold?

 

[WinchellNomNom]

I can get 20-25 drops at a time with the amount of silica u see pictured. That lasts me a pretty decent amount of time for a dripping atty

Sent from my SCH-I605 using Tapatalk 2

 

[vapdivrr]

So I'm doing these genesis setups with .8Ω resistance and trying to find a new mission. Who all is building lower than .8, and what's it like? I've got the MNKE batts with the 20amp continuous discharge rating. (I read where their Pulse rating is 80amps!) How low is a smart place to stop (.5Ω)?

hey buddy 2 questions, where and how much did you get pay for the mnke batts/ also how does everyone get that ohm symbol on the keyboard?

 

[dhomes]

I actually prefer the taste / hit of the phoenix over any genesis any day

i just plain hate having to drip all the time

vapdivrr, it's because of the phoenixs that I had to move to 32g (everything is too tight there for 28g).

@1.1/1.2 ohms on a provari (heck, they even work great on EGO batts) flavor is the best (call me crazy but I do prefer it over a HH.357 or things like that)

 

[vapdivrr]

I actually prefer the taste / hit of the phoenix over any genesis any day

i just plain hate having to drip all the time

vapdivrr, it's because of the phoenixs that I had to move to 32g (everything is too tight there for 28g).

@1.1/1.2 ohms on a provari (heck, they even work great on EGO batts) flavor is the best (call me crazy but I do prefer it over a HH.357 or things like that)

yes i imagine that size dictates wire diameters for sure. the only other device that i have tried since moving from carts and regular dripping attys was a penelope that i had for a while. it was nice but just to tight to work on, especially mending those resistance wires together, i could barely see what i was doing, thats what happens when you get old.

 

[pdib]

ohm symbol . . . ready . . . hold down the ALT key and press 234 (now release the ALT key). MNKE; avidvaper. Best batt. for sure. BTW just finished 4/5 wrap of 26g Kanthal, 5" of ss mesh in a 7/64" coil. .6Ω. LOVE IT! (oh, AGA)

 

[huysus]

WinchellNomNom, are you using a flattop battery in your natural? I can't get the IGO to sit flush like your pic.