RDA Hybrid RDAs
- Thread starter Outcast
- Start date
- th_trl_thread_readers 0
- Status
I am not familiar with the Pacific mod. However, the MCV Kingpin is not technically a hybrid mod, but rather a tube mod + 510 direct-to-battery (DTB) top cap w/ floating positive pin. Look for an atty with a non-adjustable positive contact which protrudes at least 1mm past the ends of the 510 threads or an atty with an adjustable contact. The problem with an adjustable contact is its inherent tendency to be driven back into the positive post (unless reverse threaded). I am currently looking for M2 x 0.4 x 5mm or M2 x 0.4 x 6mm copper contacts for a few of my attys to put my mind at greater ease when using DTB mods. FatDaddyVapes only has M2.5 X 8mm in stock.
Most hybrid RDAs are made specifically to mate up with a particular mod - for example the the Element Mods Elm RDA is designed to fit with their Tree of Life mod. Now, that is not to say that there aren't aren't other mods out there that might fit it - they would just have to happen to be the right height and have the right right threading, etc. perhaps if you were to tell us which hybrid RDA you're working with, there might be some folks out there that may know of other mods that might match up. One thing I can say with relative certainty- you will not be able to just pick up any old mod and make it work. Also - don't confuse hybrid mods with hybrid RDAs - they're 2 completely separate and totally unrelated things - in other words, they don't go together.
I just got a MCV kingpin a 26650 mod was seeing if there a hybrid for it
But
That RDA I did get dose look good on it
Sent from my iPhone using Tapatalk
There is just not of 30mm RDA's and most of the RTA's are junk our clones. trying to find a good copper our brass 30mm RTA is dam hard not getting much to
Come up on the Google as this being my 1st mech mod it's kinda of a new world from regulated
I'm looking for a full authentic mod and RDA/RTA I have no problem dropping 150$ on it
Sent from my iPhone using Tapatalk
Come up on the Google as this being my 1st mech mod it's kinda of a new world from regulated
I'm looking for a full authentic mod and RDA/RTA I have no problem dropping 150$ on it
Sent from my iPhone using Tapatalk
There is fasttech if you can wait a month for your order and don't have any qualms about buying clones or doing research to find out which ones you should avoid, but if you want a true 26650 mech full hybrid mod, look into the Cerberus RDA and Hades mod.
Again, if you don't have problems with clones, 88evape ships out of so cal.
I'm not here to open the clones vs authentic can of worms, but there are a few clone manufacturers in China that deliver a pretty high level of fit and finish, especially for the price. Sxk (which manufactures all of Infinites line) and ehpro come to mind. If you really like the clone and feel guilty nothing is stopping you from buying the authentic.
Again, if you don't have problems with clones, 88evape ships out of so cal.
I'm not here to open the clones vs authentic can of worms, but there are a few clone manufacturers in China that deliver a pretty high level of fit and finish, especially for the price. Sxk (which manufactures all of Infinites line) and ehpro come to mind. If you really like the clone and feel guilty nothing is stopping you from buying the authentic.
Ya I already have the kingpin so.. I would like authentic RDA our RTA in copper our brass if I can find it in 30mm just can't seem to find it I will not buy off FT but thanks for letting me know about them
Sent from my iPhone using Tapatalk
There aren't many 30mm authentics that I am aware of. The kingpin, as mentioned has a floating positive pin. I don't know if the threading on the Cerberus RDA (hybrid mode) is compatible with the threads on the battery tube of the kingpin.
I think the Kennedy 28 is the right size for a 30mm mod, but I'm too lazy to look it up and verify. Sorry.
I think the Kennedy 28 is the right size for a 30mm mod, but I'm too lazy to look it up and verify. Sorry.
The Cerberus is M26x1 threaded to fit the Hades, both made by Footoon.
You could try to look for the thread size on your device and see if it matches up. If you can't find anything then see if someone makes a hybrid 510 adapter that fits your device, isn't the same though.
You could try to look for the thread size on your device and see if it matches up. If you can't find anything then see if someone makes a hybrid 510 adapter that fits your device, isn't the same though.
Rig mod + Roughneck Liberty Bell is a true hybrid setup that gets a lot of love.
https://www.vapeamp.com
https://www.vapeamp.com
- Status
