i-Atty VS Fogger V3
- Thread starter Starstruck13
- Start date
- th_trl_thread_readers 0
- Status
Iatty, is a genesis style if you like good vapour and taste go for it. I am a genesis user on mech mod,it give me good throat hit, taste and vapour.
Fogger, I tried from a friend, it give you nice warm and taste but coiling it take some experience. A friend told me, initially he coil it and taste bad and leaked. Now he is coiling using SS and cotton and another micro coil with cotton. The cotton gave you full flavour. I'll be getting the fogger soon
If you are beginner, might want try genesis first with mech mod and protected battery. There are a lot of video on YouTube showing how to coil it
Thanks for the inputs. Yeah, did quite a bit of research on the i-atty and fogger. Fogger seems to be a bit difficult to rebuild cuz of the wells? Whereas the i-atty just slots in the mesh and coils on top. Getting my fogger somewhere this week. Planning to wick it witnh cotton too..
The Lightsaber and The Tank 2
Recently, got a trident on micro coil with cotton and 1.7 ohm. I was trying to get 1.5 ohm but ended up with 1.7ohm. Anyway, the vapour production is super great. Huge cloud!
My fogger will be in soon!
If you use cotton,please do not let it dry or dry burn it.It will burn.Please ensure the cotton is always wet..
Fogger is not so difficult to coil once you get the hang of it. Might have some slight leak issue and it is usually due to us not tightening it properly. If we remove the top cap to refill instead of refilling it through the refill hole, there are at times slight leak issue too due to changes in the pressure within (my guess only). However when it is working perfectly, it is a good piece of RBA.
Have been using my fogger on the Maraxus and Astro at 1.1 - 1.3 ohms wif no problems.
Still itchy fingers and tinking of buying the russian to try.
Have been using my fogger on the Maraxus and Astro at 1.1 - 1.3 ohms wif no problems.
Still itchy fingers and tinking of buying the russian to try.
Thanks man, so it's advisable to fill it thru the refill hole instead of removing the top cap? I saw some reviews might leak cuz of positive pressure thru the refill hole too. Any other tips? Thanks..
The Lightsaber and The Tank 2
Its the same thing i do when i realise juice are not going in and i getting dry hits.
Remove the top cap, you will see some bubbles escaping once you do that. put the top cap back again and generally it does the trick
I think i'll be trying something like this perhaps? Any members here tried, tested & proven?
http://youtu.be/V6NK6OmQ8Oo
The Lightsaber and The Tank 2
Last edited:
I have both, for the cheap entry price there pretty good. I prefer the fogged but only seems to work well with cotton. I think because it expands and contracts when dry/wet therefore keeping the holes plugged correctly preventing leaking yet opening up letting juice in preventing dry hits when in use, not as much luck with other wicking materials. Gennys tend to work well with a bit of cheesecloth wrapped over the tip and under the coil, prevents hotspots too
- Status
Similar threads
- Locked
- Locked
