I dropped my Vision Spinner...

[Jett.]

Hey guys, so I dropped my spinner recently and am having some issues. The vv adjusting spinner moves freely, but the voltage output doesn't go any higher than 3.18 volts. Has anyone had this issue, and is there a fix for it? It's the only battery I have at the moment and will have for some time... Any schematics for the components of the twist batteries? I'm not afraid to open it up and do some Jimmy rigging!

Sent from my SGH-T959V using Tapatalk 2

 

[Requiem33]

Oh a tale that happens far too often. Unfortunately I'm not aware of any schematics or fix. Sorry. If possible buy a new one and a spare.

 

[Legolas]

Hey guys, so I dropped my spinner recently and am having some issues. The vv adjusting spinner moves freely, but the voltage output doesn't go any higher than 3.18 volts. Has anyone had this issue, and is there a fix for it? It's the only battery I have at the moment and will have for some time... Any schematics for the components of the twist batteries? I'm not afraid to open it up and do some Jimmy rigging!

Sent from my SGH-T959V using Tapatalk 2

You might want to check out steeljans video it is on a ego battery but you might find it helpful

Ego-C Twist Repair - YouTube

 

[Jett.]

Thanks for the quick response! Might have to do some digging then, eh? I am hoping to buy a couple more fairly soon here, but until then it's my only device.. Hmmm...

Sent from my SGH-T959V using Tapatalk 2

 

[Jett.]

The battery still fires, and the button works fine. It's the actual vv twist that isn't working properly... Or so it seems. Thank you for the video though! Will keep it in mind when my button does go out (hopefully it doesn't!)

Sent from my SGH-T959V using Tapatalk 2

 

[Racehorse]

Try a genuine Joyetech ego twist next time? I personally have found them more hardy. Dropped tons of them and never have had a problem yet.

 

[Legolas]

The battery still fires, and the button works fine. It's the actual vv twist that isn't working properly... Or so it seems. Thank you for the video though! Will keep it in mind when my button does go out (hopefully it doesn't!)

Sent from my SGH-T959V using Tapatalk 2

The video was more so you could see it taken apart and parts that are in there, not so much for the button as it was intended for.

 

[lightofmeaning]

You broke the vv chip inside the spinner. It wont break the battery or button but damages the chip.